Ako editovat subor pod linuxom, cez telnet.

[Toman]

mam problem:

potrebujem editovat subor ktory je umiestneny tu: /usr/local/etc/usb_modeswitch.conf

potrebujem by vyzeral takto:

Kód: Vybrať všetko

########################################################
# ZTE MF628+ (tested version from Telia / Sweden)
# ZTE MF626
# ZTE MF636 (aka "Telstra / BigPond 7.2 Mobile Card")
#
# Contributor: Joakim Wennergren

DefaultVendor= 0x19d2
DefaultProduct= 0x2000

TargetVendor= 0x19d2
TargetProduct= 0x0031

# only for reference
MessageEndpoint=0x01

MessageContent="55534243123456782000000080000c85010101180101010101000000000000"

# if that command doesn't work, try the other ("eject")
;MessageContent="5553424312345678000000000000061b000000030000000000000000000000"

AKO TO MAM UROBIT????? (zamozrejme cez konzolu, cez telnet!!!....)

Tu je nejaky podobny navod.... potreboval vy som to "prelozit do cudskej reci" = krok po kroku - co zmamenaju jednotlive prikazi

Kód: Vybrať všetko

mkdir /tmp/opt
mount -obind /tmp/opt /opt
echo "/tmp/opt/*" >> /usr/local/.files
echo "mount -obind /tmp/opt /opt" >> /usr/local/sbin/post-boot
echo "/opt/bin/usb_modeswitch" >> /usr/local/sbin/post-boot
ipkg.sh update
ipkg.sh install ipkg-opt
ipkg update
ipkg install libusb
cp /tmp/mount/disc0_1/path_to_usb_modeswitch/usb_modeswitch /opt/bin/usb_modeswitch
touch /opt/etc/usb_modeswitch.conf
echo "DefaultVendor=  0x05c6" >> /opt/etc/usb_modeswitch.conf
echo "DefaultProduct= 0x1000" >> /opt/etc/usb_modeswitch.conf
echo "TargetVendor=   0x16d5" >> /opt/etc/usb_modeswitch.conf
echo "TargetProduct=  0x6502" >> /opt/etc/usb_modeswitch.conf
echo "MessageEndpoint=0x00000008" >> /opt/etc/usb_modeswitch.conf
echo "MessageContent="5553424328932a86000000000000061b000000020000000000000000000000"" >> /opt/etc/usb_modeswitch.conf
flashfs save && flashfs commit && flashfs enable

DAKUJEM ZA KAZDU POMOC!!!

[faugusztin]

To co ma byt ten navod ? To nie je o linuxe, to vyzera ako nejake pripajanie bootovacej particie v nejakom WRT firmware. Pretoze editovat samozrejme jednoducho :

Kód: Vybrať všetko

joe nazov_suboru
vi nazov_suboru
nano -w nazov_suboru
mc -e nazov_suboru

a tak dalej.

vytvorenie 3 suborov pomocou echo prikazov a presmerovania vystupu do suboru.

[Toman]

- jo... je to router beziaci na linxe...
- linuxove prikazi niesu pod roznimi linuxami kompaktibilne?

[faugusztin]

To je ako spytat sa "Ma kazdy Windows nainstalovany PSPad, Notepad++, Ultraedit aj Notepad?".

[Toman]

som bol zviknuty na MS DOS a jeho "TYPE"

funguje tam editor "VI" - aj ked praca v nom je NERODNA TRAGEDIA!!!!

Kód: Vybrať všetko

Positioning the Cursor
® 	Move cursor one space right.
¬ 	Move cursor one space left.
­ 	Move cursor up one line.
¯ 	Move cursor down one line.
ctrl-F 	Move forward one screen.
ctrl-B 	Move backward one screen.
$ 	Move cursor to end of line.
^ 	Move cursor to beginning of line.
:1 	Move to first line of file
:$ 	Move to last line of file
/ 	Search for a character string.
? 	Reverse search for a character string.
x 	Delete the character at the cursor position.
dd 	Delete the current line.
p 	Paste data that was cut with x or dd commands.
u 	Undo.

Entering Input Mode
a 	Add text after the cursor.
i 	Insert text before the cursor.
R 	Replace text starting at the cursor.
o 	Insert a new line after the current one.

Entering Command Mode
esc 	Switch from Input mode to Command mode.

Exiting or Saving Your File
:w 	Write file to disk, without exiting editor.
ZZ 	Save the file and exit.
:q! 	Quit without saving.

DAKUJEM, DAKUJEM, DAKUJEM!!!!

[faugusztin]

To si este neskusil ed, na ten som este nevyzrel ani ja. vi/vim sa uz da .

[Toman]

- takze som sa naucil s VI robit (pane boze, preco musi bit v linuxe vsetko take zlozite)
- potrebny subor som zeditovt
- a 3G modem sa spustil s routorm ASUS WL500gP (parada!)

Nastal ale netuseny problem:
- po restarte routra pripojenie nefunguje
- pozrel som subor a zmeny co som vykonal v nom NEBOLI ULOZENE!!!!!
- ak sa znovu dopisal riadky do /usr/local/etc/usb_modeswitch.conf pripojenie sa rozbehlo.....

Je nato nejake vysvetlenie?????

T.

[Patko19]

to chces zapisat do ROM ?
tak teda to editni a potom prikaz
flashfs save && flashfs commit && flashfs enable && reboot
malo by sa to natvrdo zapisat a po starte reagovat.
ak nepojde tak do init.usb hod prikaz nech to tam skopiruje alebo posle echom

[Toman]

- jo DIK, medzicasom som uz nato prisiel


T.