MSI P67A-GD65/GD55 (1155, P67), rady, skúsenosti, biosy...

[Kyselinka]

Tu mal chalan problem s bootovanim, ale nenapisal ci mu to pomohlo http://forum-en.msi.com/index.php?topic=156082.0
Osobne to tiez iba skusam

[Kyselinka]

Dalsi bios beta.

E7681IMS.1J2 ---> E7681IMS.1J3

-Fix system always reset on 2Fh issue.



Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

*Note: The checkpoint "2F" is a memory initialization checkpoint, in case anyone wonders:

Kód: Vybrať všetko

0x2B -- Memory initialization.  Serial Presence Detect (SPD) data reading 
0x2C -- Memory initialization.  Memory presence detection 
0x2D -- Memory initialization.  Programming memory timing information  
0x2E -- Memory initialization.  Configuring memory 
0x2F -- Memory initialization (other)

AMI's definition of that checkpoint is not very clear, though (as you can see...).

>>Download<<

[Kyselinka]

Mala oprava:

E7681IMS.1J3 ---> E7681IMS.1J4

- Fix the solution that system always reset on 2Fh issue.



Looks like the previous fix was not perfect. I hope, it is now ...

Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

>>Download<<

[Kyselinka]

Novy bios.





Download

>>P67A-GD65<< >>P67A-GD55<<

[Kyselinka]

Nova BETA a sumár fixov od 1.18, po 1.19

Summary: E7681IMS.1I0 ---> E7681IMS.1J0:

- Fixed Power Technology Function
- Fixed S3/S4/S5 resume will hang FF issue when set Power management to power saver mode.
- Fixed the pcie gen2 speed change to pcie gen1 issue after when S3 resume.
- Fixed the post show clear cmos information issue when under the S3 mode and turn off the Power
- Fix system always reset on 2Fh issue.
- Fix the solution that system always reset on 2Fh issue.

... and then:

E7681IMS.1J0 ---> E7681IMS.1K1

- Fixed using Startech PCI Adapter card will result to no POST.
- Fix plug a PCIEx1 network card to all the PCIEx1 slots on the motherboard and no video occur.



Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

>>Download<<

[Kyselinka]

BETA bios release E7681IMS.1K2:

E7681IMS.1K1 ---> E7681IMS.1K2

- Patch WinXP 32bit system would hang when installing NEC USB3.0 driver.
- Fix S4 resume issue.
- Patch A4tech 7100 wireless combo keyboard can not use in setup.



Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

>>Download<<

[Kyselinka]

BETA bios release E7681IMS.1K3:

E7681IMS.1K2 ---> E7681IMS.1K3

- Fixed Corsair K60 & Corsair K90 gaming keyboardand PRO Mechanical keyboard

Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

>>Download<<

[Kyselinka]

Novy bios s podporou IB, oficialne na stiahnutie



Download page: >>P67A-GD65<< >>P67A-GD55<<

Direct links: >>P67A-GD65<< >>P67A-GD55<<

[Kyselinka]

Novy bios nam priniesol ClickII
No len OC mu nejak nevonia, lebo som sa ani do winu nevedel dostat, hned na mna vykukol kod 0x124 a 0x09C



//edit: SB sa na nom taktovat zrejme neda, skoda

//edit2: len upozornim tych, co maju SB, aby neupgradovali bios na tento najnovsi. Taktuje sa na nom velmi zle a nejde downgradnut naspat na starsie verzie
Podla informacii z MSI bude downgrade zrejme mozny v buducom release .. teda aspon dufam

[Andrew007]

Kyselinka vidim ze mas poriadny prehlad v tych biosoch tak mal by som jednu otazku. Ktory, resp. ktoru verziu uznavas za najstabilnejsiu aj z hladiska OC (BSOD, reg. fanov, spolupraca v Speedfane ) . Lebo mal som viacero verzii, ktore som skusal do februara odvtedy som nerobil upgrade lebo mam nastavene regulovanie cez speedfan - profily podla kriviek kedze jediny bios v ktorom mi to fungovalo a este funguje je verzia V1.13 - 6.24.2011 . Dakujem Ti za skoru odpoved.

btw. oc sa drzi teraz pri 4,7 ale vraj s novym biosom tuto hranicu prekrocim s new biosom bez prenastaveni hodnot stability ..

[Kyselinka]

Osobne som mal asi najoverenejsi bios 1.19.
OC pekne drzalo, cold boot bol "ako-tak" vyrieseny, cize vsetko islo ako ma. No momentalne mam dosku na RMA, ale ako pozeram, tak nic moc nove nevyslo. Mozno na MSI fore nieco bude, ale zatial som nemal cas to popozerat, lebo som bol par dni mimo
A neviem ci MSI stiahlo najnovsi bios v4.0, ale vobec sa mi nezobrazuje na oficialnej stranke, trosku divne
Ale ako pisem vyssie, tak ho ani neskusaj. Kludne mozes nahodit v1.19, ale ked teraz nemas z nicim ziadne problemy a OC je pekne stabilne, tak nevidim najmensi dovod preco upgradovat

[sore500]

ja som vystriedal BIOS 1.H, 1.I a 1.19 a na kazdom mi funguje regulacia podla krivky a najstabilnejsie OC som dosiahol na prave spominanej verzii 1.19
ale presne ako pise Kyselinka, ked ti vsetko funguje tak ako ma, tak flash BIOSu nema zmysel

[Kyselinka]

No ja som na tejto doske vystriedal komplet vsetky biosy (vratane beta), ale ten posledny sviniar v4.0 sa mi stal osudnym
Uvidime, co povedia na RMA

[glirpi]

Tak dlho sa chodí s džbánom po vodu, až kým sa ucho odtrhne.

[Kyselinka]

Sak to a este ked ten dzban hadzes o zem. Inak pozdravujem spolocnost ZSE