kupa wifi routra

Sekcia primárne určená k radám o nákupe PC komponentov a príslušenstva...
Používateľov profilový obrázok
Odar
Sponzor fóra silver
Sponzor fóra silver
Príspevky: 5652
Dátum registrácie: St 13. Okt, 2010, 17:10
Bydlisko: PD / NR Slovensko

Re: kupa wifi routra

Príspevok od používateľa Odar »

molnart --> Ano, rychlosti su cez wifi. LAN som zatial neskusal. Zaujimal ma v prvom rade hlavne dosah a rychlosti cez wifi.

mp3turbo --> Zatial ho nemam trvalo nainstalovany, len som ho narychlo vyskusal. Blizi sa mi dovolenka. Po dovolenke sem mozem dat viac info (vcetne testu prenosu cez LAN), aj vypis z LOGu. Ak sa z toho bude dat vytlacit viac, budem rad za kazdu radu, ako na to.

Vypis /export

Kód: Vybrať všetko








  MMM      MMM       KKK                          TTTTTTTTTTT      KKK
  MMMM    MMMM       KKK                          TTTTTTTTTTT      KKK
  MMM MMMM MMM  III  KKK  KKK  RRRRRR     OOOOOO      TTT     III  KKK  KKK
  MMM  MM  MMM  III  KKKKK     RRR  RRR  OOO  OOO     TTT     III  KKKKK
  MMM      MMM  III  KKK KKK   RRRRRR    OOO  OOO     TTT     III  KKK KKK
  MMM      MMM  III  KKK  KKK  RRR  RRR   OOOOOO      TTT     III  KKK  KKK

  MikroTik RouterOS 5.24 (c) 1999-2013       http://www.mikrotik.com/
  MikroTik RouterOS 5.24 (c) 1999-2013       http://www.mikrotik.com/

The following default configuration has been installed on your router:
-------------------------------------------------------------------------------
Wireless Configuration:  
        mode:           ap-bridge;  
        band:           2ghz-b/g/n;  
        frequency:      2412;  
        ht-chains:      two;  
        ht-extension:   20/40mhz-ht-above;  
  
WAN (gateway) Configuration:  
        gateway:        ether1  (renamed with extension '-gateway');  
        firewall:       enabled;  
        NAT:            enabled;  
        DHCP Client:    enabled;  
  
LAN Configuration:  
        LAN Port:       bridge-local;  
        switch group:   ether2 (master), ether3, ether4, ether5  
                (renamed with extensions '-master-local' and '-slave-local')  
        LAN IP:         192.168.88.1;  
        DHCP Server:    enabled;  

-------------------------------------------------------------------------------
You can type "v" to see the exact commands that are used to add and remove
this default configuration, or you can view them later with
'/system default-configuration print' command.
To remove this default configuration type "r" or hit any other key to continue.
If you are connected using the above IP and you remove it, you will be disconnec
ted.

Confirming configuration
jan/02/1970 00:00:19 system,error,critical router was rebooted without proper shut
down
jan/02/1970 00:00:07 system,error,critical router was rebooted without proper shut
down
jan/01/1970 23:00:07 system,error,critical router was rebooted without proper shut
down
[admin@Odar's MikroTik] > /export
# jan/01/1970 23:01:55 by RouterOS 5.24
# software id = BQZK-GB6I
#
/interface bridge
add admin-mac=D4:CA:6D:93:E9:BC ageing-time=5m arp=enabled auto-mac=no \
    disabled=no forward-delay=15s l2mtu=2290 max-message-age=20s mtu=1500 name=\
    bridge-local priority=0x8000 protocol-mode=rstp transmit-hold-count=6
/interface ethernet
set 0 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=\
    no full-duplex=yes l2mtu=1598 mac-address=00:0C:6E:9C:AA:13 master-port=\
    none mtu=1500 name=ether1-gateway speed=1Gbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=\
    no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:93:E9:BC master-port=\
    none mtu=1500 name=ether2-master-local speed=1Gbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=\
    no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:93:E9:BD master-port=\
    ether2-master-local mtu=1500 name=ether3-slave-local speed=1Gbps
set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=\
    no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:93:E9:BE master-port=\
    ether2-master-local mtu=1500 name=ether4-slave-local speed=1Gbps
set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited disabled=\
    no full-duplex=yes l2mtu=1598 mac-address=D4:CA:6D:93:E9:BF master-port=\
    ether2-master-local mtu=1500 name=ether5-slave-local speed=1Gbps
/interface ethernet switch
set 0 mirror-source=none mirror-target=none name=switch1
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods=\
    passthrough group-ciphers=aes-ccm group-key-update=5m interim-update=0s \
    management-protection=disabled management-protection-key="" mode=\
    dynamic-keys name=default radius-eap-accounting=no radius-mac-accounting=no \
    radius-mac-authentication=no radius-mac-caching=disabled radius-mac-format=\
    XX:XX:XX:XX:XX:XX radius-mac-mode=as-username static-algo-0=none \
    static-algo-1=none static-algo-2=none static-algo-3=none static-key-0="" \
    static-key-1="" static-key-2="" static-key-3="" static-sta-private-algo=\
    none static-sta-private-key="" static-transmit-key=key-0 \
    supplicant-identity=MikroTik tls-certificate=none tls-mode=no-certificates \
    unicast-ciphers=aes-ccm wpa-pre-shared-key=odarodar wpa2-pre-shared-key=\
    odarodar
/interface wireless
set 0 adaptive-noise-immunity=none allow-sharedkey=no antenna-gain=0 area="" \
    arp=enabled band=2ghz-b/g/n basic-rates-a/g=6Mbps basic-rates-b=1Mbps \
    bridge-mode=enabled channel-width=20/40mhz-ht-above compression=no country=\
    "slovak republic" default-ap-tx-limit=0 default-authentication=yes \
    default-client-tx-limit=0 default-forwarding=yes dfs-mode=none \
    disable-running-check=no disabled=no disconnect-timeout=3s distance=indoors \
    frame-lifetime=0 frequency=2412 frequency-mode=manual-txpower \
    frequency-offset=0 hide-ssid=no ht-ampdu-priorities=0 ht-amsdu-limit=8192 \
    ht-amsdu-threshold=8192 ht-basic-mcs=\
    mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 ht-guard-interval=any \
    ht-rxchains=0,1 ht-supported-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,\
    mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15,mcs-16,mcs-17,mc\
    s-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" ht-txchains=0,1 \
    hw-fragmentation-threshold=disabled hw-protection-mode=none \
    hw-protection-threshold=0 hw-retries=7 l2mtu=2290 mac-address=\
    D4:CA:6D:93:E9:C0 max-station-count=2007 mode=ap-bridge mtu=1500 \
    multicast-helper=default name=wlan1 noise-floor-threshold=default \
    nv2-cell-radius=30 nv2-noise-floor-offset=default nv2-preshared-key="" \
    nv2-qos=default nv2-queue-count=2 nv2-security=disabled on-fail-retry-time=\
    100ms periodic-calibration=default periodic-calibration-interval=60 \
    preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
    D4CA6D93E9C0 rate-selection=advanced rate-set=default scan-list=default \
    security-profile=default ssid="Odar's MikroTik" station-bridge-clone-mac=\
    00:00:00:00:00:00 supported-rates-a/g=\
    6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b=\
    1Mbps,2Mbps,5.5Mbps,11Mbps tdma-period-size=2 tx-power-mode=default \
    update-stats-interval=disabled wds-cost-range=50-150 wds-default-bridge=\
    none wds-default-cost=100 wds-ignore-ssid=no wds-mode=disabled \
    wireless-protocol=802.11 wmm-support=disabled
/interface wireless manual-tx-power-table
set wlan1 manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9Mbp\
    s:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:17,H\
    T20-1:17,HT20-2:17,HT20-3:17,HT20-4:17,HT20-5:17,HT20-6:17,HT20-7:17,HT40-0:\
    17,HT40-1:17,HT40-2:17,HT40-3:17,HT40-4:17,HT40-5:17,HT40-6:17,HT40-7:17"
/interface wireless nstreme
set wlan1 disable-csma=no enable-nstreme=no enable-polling=yes framer-limit=\
    3200 framer-policy=none
/ip hotspot profile
set [ find default=yes ] dns-name="" hotspot-address=0.0.0.0 html-directory=\
    hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=\
    cookie,http-chap name=default rate-limit="" smtp-server=0.0.0.0 \
    split-user-domain=no use-radius=no
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m name=default \
    shared-users=1 status-autorefresh=1m transparent-proxy=no
/ip ipsec proposal
set [ find default=yes ] auth-algorithms=sha1 disabled=no enc-algorithms=3des \
    lifetime=30m name=default pfs-group=modp1024
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp authoritative=after-2sec-delay bootp-support=\
    static disabled=no interface=bridge-local lease-time=3d name=default
/ppp profile
set 0 change-tcp-mss=yes name=default only-one=default use-compression=default \
    use-encryption=default use-mpls=default use-vj-compression=default
set 1 change-tcp-mss=yes name=default-encryption only-one=default \
    use-compression=default use-encryption=yes use-mpls=default \
    use-vj-compression=default
/queue type
set 0 kind=pfifo name=default pfifo-limit=50
set 1 kind=pfifo name=ethernet-default pfifo-limit=50
set 2 kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5
set 3 kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 \
    red-limit=60 red-max-threshold=50 red-min-threshold=10
set 4 kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5
set 5 kind=none name=only-hardware-queue
set 6 kind=mq-pfifo mq-pfifo-limit=50 name=multi-queue-ethernet-default
set 7 kind=pfifo name=default-small pfifo-limit=10
/routing bgp instance
set default as=65530 client-to-client-reflection=yes disabled=no \
    ignore-as-path-len=no name=default out-filter="" redistribute-connected=no \
    redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
    redistribute-static=no router-id=0.0.0.0 routing-table=""
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never in-filter=ospf-in \
    metric-bgp=auto metric-connected=20 metric-default=1 metric-other-ospf=auto \
    metric-rip=20 metric-static=20 name=default out-filter=ospf-out \
    redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no \
    redistribute-rip=no redistribute-static=no router-id=0.0.0.0
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default name=\
    backbone type=default
/snmp community
set [ find default=yes ] addresses="" authentication-password="" \
    authentication-protocol=MD5 encryption-password="" encryption-protocol=DES \
    name=public read-access=yes security=none write-access=no
/system logging action
set 0 memory-lines=100 memory-stop-on-full=no name=memory target=memory
set 1 disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \
    disk-stop-on-full=no name=disk target=disk
set 2 name=echo remember=yes target=echo
set 3 bsd-syslog=no name=remote remote-port=514 src-address=0.0.0.0 \
    syslog-facility=daemon syslog-severity=auto target=remote
/user group
set read name=read policy="local,telnet,ssh,reboot,read,test,winbox,password,web\
    ,sniff,sensitive,api,!ftp,!write,!policy" skin=default
set write name=write policy="local,telnet,ssh,reboot,read,write,test,winbox,pass\
    word,web,sniff,sensitive,api,!ftp,!policy" skin=default
set full name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,wi\
    nbox,password,web,sniff,sensitive,api" skin=default
/interface bridge port
add bridge=bridge-local disabled=no edge=auto external-fdb=auto horizon=none \
    interface=ether2-master-local path-cost=10 point-to-point=auto priority=\
    0x80
add bridge=bridge-local disabled=no edge=auto external-fdb=auto horizon=none \
    interface=wlan1 path-cost=10 point-to-point=auto priority=0x80
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=no
/interface ethernet switch port
set 0 vlan-header=leave-as-is vlan-mode=disabled
set 1 vlan-header=leave-as-is vlan-mode=disabled
set 2 vlan-header=leave-as-is vlan-mode=disabled
set 3 vlan-header=leave-as-is vlan-mode=disabled
set 4 vlan-header=leave-as-is vlan-mode=disabled
set 5 vlan-header=leave-as-is vlan-mode=disabled
/interface l2tp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=default-encryption \
    enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/interface ovpn-server server
set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\
    default enabled=no keepalive-timeout=60 mac-address=FE:70:64:8E:5F:80 \
    max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption enabled=\
    no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/interface sstp-server server
set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=\
    default enabled=no keepalive-timeout=60 max-mru=1500 max-mtu=1500 mrru=\
    disabled port=443 verify-client-certificate=no
/interface wireless align
set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=\
    00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 \
    frames-per-second=25 receive-all=no ssid-all=no
/interface wireless sniffer
set channel-time=200ms file-limit=10 file-name="" memory-limit=10 \
    multiple-channels=no only-headers=no receive-errors=no streaming-enabled=no \
    streaming-max-rate=0 streaming-server=0.0.0.0
/interface wireless snooper
set channel-time=200ms multiple-channels=yes receive-errors=no
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=192.168.88.1/24 comment="default configuration" disabled=no \
    interface=wlan1 network=192.168.88.0
/ip dhcp-client
add add-default-route=yes comment="default configuration" \
    default-route-distance=1 disabled=no interface=ether1-gateway use-peer-dns=\
    yes use-peer-ntp=yes
/ip dhcp-server config
set store-leases-disk=5m
/ip dhcp-server network
add address=192.168.88.0/24 comment="default configuration" dhcp-option="" \
    dns-server=192.168.88.1 gateway=192.168.88.1 netmask=24 ntp-server="" \
    wins-server=""
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
    max-udp-packet-size=4096 servers=""
/ip dns static
add address=192.168.88.1 disabled=no name=router ttl=1d
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
    tcp-close-wait-timeout=10s tcp-established-timeout=1d tcp-fin-wait-timeout=\
    10s tcp-last-ack-timeout=10s tcp-syn-received-timeout=5s \
    tcp-syn-sent-timeout=5s tcp-syncookie=no tcp-time-wait-timeout=10s \
    udp-stream-timeout=3m udp-timeout=10s
/ip firewall filter
add action=accept chain=input comment="default configuration" disabled=no \
    protocol=icmp
add action=accept chain=input comment="default configuration" connection-state=\
    established disabled=no
add action=accept chain=input comment="default configuration" connection-state=\
    related disabled=no
add action=drop chain=input comment="default configuration" disabled=no \
    in-interface=ether1-gateway
/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" disabled=no \
    out-interface=ether1-gateway to-addresses=0.0.0.0
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061 sip-direct-media=yes
set pptp disabled=no
/ip hotspot service-port
set ftp disabled=no ports=21
/ip neighbor discovery
set ether1-gateway disabled=yes
set ether2-master-local disabled=no
set ether3-slave-local disabled=no
set ether4-slave-local disabled=no
set ether5-slave-local disabled=no
set wlan1 disabled=yes
set bridge-local disabled=no
/ip proxy
set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \
    cache-on-disk=no enabled=no max-cache-size=unlimited \
    max-client-connections=600 max-fresh-time=3d max-server-connections=600 \
    parent-proxy=0.0.0.0 parent-proxy-port=0 port=8080 serialize-connections=no \
    src-address=0.0.0.0
/ip service
set telnet address="" disabled=no port=23
set ftp address="" disabled=no port=21
set www address="" disabled=no port=80
set ssh address="" disabled=no port=22
set www-ssl address="" certificate=none disabled=yes port=443
set api address="" disabled=yes port=8728
set winbox address="" disabled=no port=8291
/ip smb
set allow-guests=yes comment=MikrotikSMB domain=MSHOME enabled=no interfaces=\
    all
/ip smb shares
set [ find default=yes ] comment="default share" directory=/pub disabled=no \
    max-sessions=10 name=pub
/ip smb users
set [ find default=yes ] disabled=no name=guest password="" read-only=yes
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=no inactive-flow-timeout=\
    15s interfaces=all
/ip upnp
set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes
/mpls
set dynamic-label-range=16-1048575 propagate-ttl=yes
/mpls interface
set [ find default=yes ] disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \
    lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \
    use-explicit-null=no
/port firmware
set directory=firmware ignore-directip-modem=no
/ppp aaa
set accounting=yes interim-update=0s use-radius=no
/queue interface
set ether1-gateway queue=only-hardware-queue
set ether2-master-local queue=only-hardware-queue
set ether3-slave-local queue=only-hardware-queue
set ether4-slave-local queue=only-hardware-queue
set ether5-slave-local queue=only-hardware-queue
set wlan1 queue=wireless-default
/radius incoming
set accept=no port=3799
/routing bfd interface
set [ find default=yes ] disabled=no interface=all interval=0.2s min-rx=0.2s \
    multiplier=5
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \
    gateway-selection=no-gateway origination-interval=5s preferred-gateway=\
    0.0.0.0 timeout=1m ttl=50
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \
    metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
    redistribute-connected=no redistribute-ospf=no redistribute-static=no \
    routing-table=main timeout-timer=3m update-timer=30s
/snmp
set contact="" enabled=no engine-id="" location="" trap-generators="" \
    trap-target="" trap-version=1
/system clock
set time-zone-name=Etc/GMT+1
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\
    "jan/01/1970 00:00:00" time-zone=+00:00
/system identity
set name="Odar's MikroTik"
/system leds
set 0 disabled=no interface=wlan1 leds=wlan-led type=wireless-status
/system logging
set 0 action=memory disabled=no prefix="" topics=info
set 1 action=memory disabled=no prefix="" topics=error
set 2 action=memory disabled=no prefix="" topics=warning
set 3 action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=no mode=broadcast primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0
/system resource irq
set 0 cpu=auto
set 1 cpu=auto
set 2 cpu=auto
set 3 cpu=auto
/system routerboard settings
set boot-device=nand-if-fail-then-ethernet boot-protocol=bootp cpu-frequency=\
    600MHz force-backup-booter=no silent-boot=no
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\
    0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\
    none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=100
/tool e-mail
set address=0.0.0.0 from=<> password="" port=25 starttls=no user=""
/tool graphing
set page-refresh=300 store-every=5min
/tool graphing interface
add allow-address=0.0.0.0/0 disabled=no interface=ether1-gateway store-on-disk=\
    yes
/tool mac-server
set [ find default=yes ] disabled=yes interface=all
add disabled=no interface=ether2-master-local
add disabled=no interface=ether3-slave-local
add disabled=no interface=ether4-slave-local
add disabled=no interface=ether5-slave-local
add disabled=no interface=wlan1
add disabled=no interface=bridge-local
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes interface=all
add disabled=no interface=ether2-master-local
add disabled=no interface=ether3-slave-local
add disabled=no interface=ether4-slave-local
add disabled=no interface=ether5-slave-local
add disabled=no interface=wlan1
add disabled=no interface=bridge-local
/tool mac-server ping
set enabled=yes
/tool sms
set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret=""
/tool sniffer
set file-limit=1000KiB file-name="" filter-ip-address="" filter-ip-protocol="" \
    filter-mac-address="" filter-mac-protocol="" filter-port="" filter-stream=\
    yes interface=all memory-limit=100KiB memory-scroll=yes only-headers=no \
    streaming-enabled=no streaming-server=0.0.0.0
/tool traffic-generator
set latency-distribution-scale=10 test-id=0
/user aaa
set accounting=yes default-group=read exclude-groups="" interim-update=0s \
    use-radius=no
[admin@Odar's MikroTik] >  
- PC
Spoiler: ukázať
FSP Fortron Hydro Ti PRO 1 000 W
Antec C8
Crucial Ballistix 2 x 16GB DDR4 3600 CL16
Kingston KC3000 2TB NVMe + Thermalright HR-09 2280 PRO Black, Samsung 970 EVO Plus 2TB NVMe
Gigabyte B550 I AORUS PRO AX
Ryzen 9 5900X
ASUS TUF GeForce RTX 3080 GAMING O12G (0.862V @ 1890 MHz)
Noctua NH-U12A
7 x Noctua NF-A14x25r G2
AOC Q3279VWF
-- HTPC
Spoiler: ukázať
Corsair SF600 600W 80 PLUS Platinum
Cooler Master MasterBox NR200
Asus ROG STRIX B760-I GAMING WIFI
i5-13500 (power limit 60 W)
Kingston FURY Beast DDR5 2x16 GB 5200 MHz CL40
Silicon Power P34A60 2 TB NVMe + Samsung 850 EVO 500 GB SATA + Crucial MX500 2 TB SATA + WD Blue 3D NAND 500 GB M.2 SATA
Noctua NH-L9x65
2 x Noctua NF-A12x15 PWM Chromax.black.swap
mp3turbo
Pokročilý používateľ
Pokročilý používateľ
Príspevky: 13124
Dátum registrácie: St 27. Apr, 2011, 11:16
Bydlisko: ta Blava, ňe ?

Re: kupa wifi routra

Príspevok od používateľa mp3turbo »

konfiguraciu podrobnejsie pozriem dnes hlboko v noci, len ma zaujima ako si testoval rychlost cez wifi ked si netestoval LAN ?

Dosah : necakaj ziadne zazraky, fyzika plati rovnako pre Mikrotik ako aj pre TPLink/Dlink/Cisco. Jedine spolahlive riesenie je proste externa antena, aspon sektorova, idealne vsesmerova a pozor, samozrejme ze "ideálne žiariaci izotop" nikdy mat nebudeme - teda pozor na horizontalnu a vertikalnu vyzarovaciu rovinu pouzitej antenky. O tych tycinkach co sa standartne davaju k takymto produktom sa vobec radsej bavit nebudeme, to je nahoda za nahodou ako hovori kamarat.

edit : az teraz som si pozrel ze tento mikrotik ma INTEGROVANU antenu. To nemozes porovnavat s tromi externymi tycinkami TPLinku...
Som matematik... Vzrusuju ma cisla, napriklad 8300 na otackomeri alebo 2,15 baru z kompresora a este aj 1-12-5-8-3-10-6-7-2-11-4-9.
Používateľov profilový obrázok
Odar
Sponzor fóra silver
Sponzor fóra silver
Príspevky: 5652
Dátum registrácie: St 13. Okt, 2010, 17:10
Bydlisko: PD / NR Slovensko

Re: kupa wifi routra

Príspevok od používateľa Odar »

Ano, tej integrovanej anteny som si vedomy. Podla mna prave preto, ze je integrovana a porovnaval som to pre zaujimavost s TP-Linkom, ktory ma 3 anteny, tak je ten dosah, aj rychlost velmi slusna. Samozrejme, ked bude router finalne instalovany, mozem skusit ine natocenie, iny kanal, atd. Na moje pokrytie v byte to bohate staci.
Rychlost cez wifi som testoval na notebooku lenovo W520 na stranke speedtest.net. Cez LAN to bude urcite v poriadku. Cez LAN ma skor zaujimaju prenosove rychlosti pri kopirovani velkych suborov (HD filmov) z notebooku do HTPC v ramci LAN.

Ak v konfiguracii najdes cosi zasadne, co je tam zle, budem rad za kazde nasmerovaie. Ale v globale som nastavil iba volny kanal pre wifi, LAN prepol na 1 Gbit. Do pokrocilych nastaveni si netrufam. Je tam toho naozaj velmi vela a treba mat okolo toho co to nastudovane. V sietach sa nevyznam. Iba zakladne veci konfiguracie beznych routerov. Ale toto je uplne niekde inde.

Dakujem za ochotu.
- PC
Spoiler: ukázať
FSP Fortron Hydro Ti PRO 1 000 W
Antec C8
Crucial Ballistix 2 x 16GB DDR4 3600 CL16
Kingston KC3000 2TB NVMe + Thermalright HR-09 2280 PRO Black, Samsung 970 EVO Plus 2TB NVMe
Gigabyte B550 I AORUS PRO AX
Ryzen 9 5900X
ASUS TUF GeForce RTX 3080 GAMING O12G (0.862V @ 1890 MHz)
Noctua NH-U12A
7 x Noctua NF-A14x25r G2
AOC Q3279VWF
-- HTPC
Spoiler: ukázať
Corsair SF600 600W 80 PLUS Platinum
Cooler Master MasterBox NR200
Asus ROG STRIX B760-I GAMING WIFI
i5-13500 (power limit 60 W)
Kingston FURY Beast DDR5 2x16 GB 5200 MHz CL40
Silicon Power P34A60 2 TB NVMe + Samsung 850 EVO 500 GB SATA + Crucial MX500 2 TB SATA + WD Blue 3D NAND 500 GB M.2 SATA
Noctua NH-L9x65
2 x Noctua NF-A12x15 PWM Chromax.black.swap
mp3turbo
Pokročilý používateľ
Pokročilý používateľ
Príspevky: 13124
Dátum registrácie: St 27. Apr, 2011, 11:16
Bydlisko: ta Blava, ňe ?

Re: kupa wifi routra

Príspevok od používateľa mp3turbo »

mas tam bridge (wlan a ether2) co som ocakaval, ja osobne to nemam rad a vykon v routovanej sieti je tusim o malinky chlp, ale predsalen vyssi. V kazdom pripade je routovana siet spravnejsia a lepsia ale to teraz nejdeme riesit lebo je to obrovska zmena.

Nemas tam nic vyslovene zle. Skus urobit toto:



/interface wireless print

/interface wireless set 0 channel-width=20/40mhz-ht-below [namiesto uvodnej frekvencie 2412 teda prveho kanalu a "hore nad nim = above" pouzije 2412 a frekvencie pod nim, below. Tym by si sa mohol ciastocne vyhnut ruseniu na kanaloch 2 a 3 a 4, samozrejme extremne ovplyvnujuc priepustnost k tvojmu dobru. 802.11n je citlivejsie ako kožka na cicine]. Mozes vyskusat aj inu frekvenciu, napriklad namiesto 2412 pouzi 2472 teda posledny 13ty kanal, respektive uplne idealne ak to tvoja wirelesska v notebooku umoznuje, 14ty kanal ktory u nas nikto urcite nepouziva, /interface wireless set 0 frequency=2484 tam budes zarucene takmer uplne bez rusenia :) na domace pouzitie sa to da v pohode. V pripade 14teho kanalu ale ponechat nastavenie channel-width=ABOVE tak ako mas teraz.

/interface wireless set 0 default-forwarding=no [detaily su nadlho].

/interface wireless set 0 frequency-mode=superchannel [manual tx power nie je vzdy to prave orešanské, nutit kazdu kartu podla prednastavenej tabulky...]

/interface wireless set 0 distance=dynamic [mas tam INDOORS, toto by eventualne mohlo priniest nejaky chlp horedole, treba ale otestovat. Mikrotik by nemal nastavovat zbytocne dlhe ACK casy aj napriek tomu ze ho pustis "za" maxima indoor nastaveni.]


V poslednom rade je MIMO 2x2 uplne zbytocne, takze by som mozno naschval zalimitoval datarate na 150Mbps pouzitim MIMO 1x1 respektive klasickeho 802.11n protokolu co je maximum s jednou antenkou. Osobne som stretol vela situacii kedy mensi datarate (tu sa bavime 150Mbps versus 300Mbps) priniesol vyssiu rychlost a to predovsetkym kvoli odolnosti voci ruseniu :

/interface wireless set 0 ht-rxchains=0 ht-txchains=0 [pripadne namiesto =0 pouzit =1, zavisi od vnutorneho zapojenia konektorov na wirelessku. Otestujes, lahko uvidis]. 150Mbps datarate hodi okolo 105 az 108Mbps realny TCP/IP traffic a to ti staci na internet lebo rychlejsi ajtak doma nemas, cize je uplne zbytocne trieskat 300Mbps datarate prostrednictvom zdvojeneho 802.11n a phase-shift technologie ked to k nicomu dobremu viest nemoze.


Poznamocka : odloz si povodne parametre aby si sa k nim vedel vratit. Nedokazem zagarantovat ze v tvojom konkretnom prostredi nedojde este k zhorseniu oproti sucasnemu stavu, radio je svina.

Skus manipulovat s umiestnenim tej krabicky, nastojaka, nalezato, otocit ritou dopredu, hlavou dole. Netestuj cez speedtest.net a podobne pretoze taketo sluzby samy o sebe maju "rozptyl" a ked spravis 10 merani, nebude ani jedno rovnake. Prieser je ze potom uz ako testovat :) ja mam vlastne moznosti, tebe doporucujem stahovat jeden a ten isty subor napriklad z ceskej univerzity CVUT:

ftp://ftp.cvut.cz/ubuntu-releases/13.04 ... p-i386.iso

schvalne si vyskusaj stahovat na kabli zoparkrat ake budes mat vysledky - mali by byt extremne rovnake. CVUT ma totiz spickovu konektivitu a napriklad mne osobne ide cokolvek od nich extremne, ale fakt extremne vyrovnano (=98Mbit/ na 100Mbit ethernete ale proste vkuse vkuse pripadne na gigabite cislo ktore tu radsej nebudem prezentovat). Mas to jeden a ten isty subor, z jedneho a toho isteho zdroja, ked budes testovat niekedy vecer okolo desiatej pripadne rano do siedmej, mas absolutnu garanciu ze ti nic nestoji v ceste.

Na moje obrovske pocudovanie EUBA, teda Ekonomicka univerzita v Bratislave so svojim multigigabit pripojenim cez SANET do Sixu ide nevyrovnane, kukal som jak kreten :
ftp://ftp.euba.sk/zimbra-packages/IRONM ... 065031.tgz
ftp://ftp.euba.sk/vmware/FreeBSD_9.1_zi ... vmware.tgz
teraz, v sobotu o 23:23, mi skace od 75Mbit/s az do 99.95Mbit/s, horna hranica je ocakavana ale ten rozptyl je ze what the fuck. Ceska CVUT ide betonovo fest a aj mi vzdy chodila betonovo. Nepytaj sa preco, neviem.

No a daj vediet vysledky, len tak zo srandy. Zdoraznujem ze testovat cez radio nie je objektivne, tam sa podmienky nekontrolovatelne mimo tvojej moci vedia (susedia vytvaraju nerovnomerne rusenie a podobne).

Uf to som sa zase vyšantil s prispevkom.
Som matematik... Vzrusuju ma cisla, napriklad 8300 na otackomeri alebo 2,15 baru z kompresora a este aj 1-12-5-8-3-10-6-7-2-11-4-9.
Používateľov profilový obrázok
Odar
Sponzor fóra silver
Sponzor fóra silver
Príspevky: 5652
Dátum registrácie: St 13. Okt, 2010, 17:10
Bydlisko: PD / NR Slovensko

Re: kupa wifi routra

Príspevok od používateľa Odar »

Dakujem za namahu a vycerpavajucu odpoved. Idem cosi poskusat. Dam sem potom pripadne info, co pomohlo.

EDIT:
Testoval som cez jDownloader, stahoval som HD film z netload.in cez premium account.

Takto to vyzera pri stahovani cez LAN. Linka vytazena na maximum http://imageshack.us/a/img9/3914/q0lr.jpg

Takto to vyzera u mna s wifi http://imageshack.us/a/img842/6641/cqfv.png Najlepsie by bolo u mna pouzit kanal 14, ale v MikroTik-u ho neviem nastavit. Maximalne kanal 13. Tak som nechal kanal 1 a prepol na HT Below. Zmena viditelna hned na prvy pohlad. S HD Above som sa nad 5 MB/s nedostal http://imageshack.us/a/img826/3033/xf74.jpg

Potom som skusil kanal 13 s HT Below, to sa mi zda este lepsie http://imageshack.us/a/img96/9733/xrni.jpg Potom som na kanali 13 skusil prepnut na HT Above http://imageshack.us/a/img202/2393/asz5.jpg tam celkova rychlost klesla, pretoze dochadzalo castejsie poklesom rychlosti.

Prepnutie z indoors na dynamic nemalo vplyv takmer ziadny, prepnutie ht-rxchains a ht-txchains spomalovalo, nechal som to tak, ako to bolo default. Prepnutie MIMO 2x2 na MIMO 1x1 neviem najst (resp. limitaciu na 150 Mbps). Bud som slepy, alebo je to niekde moc zahrabane.

Kopirovanie cez FTP cez FileZillu z jedneho PC do druheho. Zdrojove PC AMD X2 5050e, WD5000AAKS, siet Realtek, win 7; cielove lenovo W520, SSD Intel 320 series http://imageshack.us/a/img16/6937/lofa.jpg

Dakujem za pomoc. Zas som sa nieco naucil. Snad bude tvoj a nasledne moj prispevok inspiraciou aj pre inych.
- PC
Spoiler: ukázať
FSP Fortron Hydro Ti PRO 1 000 W
Antec C8
Crucial Ballistix 2 x 16GB DDR4 3600 CL16
Kingston KC3000 2TB NVMe + Thermalright HR-09 2280 PRO Black, Samsung 970 EVO Plus 2TB NVMe
Gigabyte B550 I AORUS PRO AX
Ryzen 9 5900X
ASUS TUF GeForce RTX 3080 GAMING O12G (0.862V @ 1890 MHz)
Noctua NH-U12A
7 x Noctua NF-A14x25r G2
AOC Q3279VWF
-- HTPC
Spoiler: ukázať
Corsair SF600 600W 80 PLUS Platinum
Cooler Master MasterBox NR200
Asus ROG STRIX B760-I GAMING WIFI
i5-13500 (power limit 60 W)
Kingston FURY Beast DDR5 2x16 GB 5200 MHz CL40
Silicon Power P34A60 2 TB NVMe + Samsung 850 EVO 500 GB SATA + Crucial MX500 2 TB SATA + WD Blue 3D NAND 500 GB M.2 SATA
Noctua NH-L9x65
2 x Noctua NF-A12x15 PWM Chromax.black.swap

Návrat na "Nákupná poradňa"