Sempron64 s754 pretakovanie/problemy

[cgokuz]

Na stranke vyrobcu clockgenu je navod. Je to jednoduche ... Vlozis jednoducho dalsiu hodnotu do registrov nech sa ti to spusta s urcitymi parametrami hned po starte windowsu

Vdaka za radu :o , hned to pozrem ako sa dostanem k PC...

[miso23]

2Rusty :Skusal som to ale neslo mi to.Napis ako to treba ak mozes.A nevies kde by som mohol najst zmodifikovany BIOS pre moju dosku?Lebo nemozem menit nasobic,mozno potom by mi to islo vyssie aj v BIOSe,lebo taktenie v softe je vraj nespolahlive...

2-TAMY- :Ja som nastavil HTT3x uz pri zaciatku taktovania,lebo inak by som sa nedostal nad 210 FSB.

[-TAMY-]

a ramky si dal na kolko?

[miso23]

Ramky mam na 166Mhz 2-3-3-7 1T .

[Rusty]

Kód: Vybrať všetko

 The "ghost" mode

When using the file parameter, ClockGen runs without any graphic interface (ghost mode) and directly sets the settings stored in a file. The setting file structure is described just below.
In order to do this, you can either create a shortcut or a .bat file, in which you write :

CG-xxxxxx.exe -file=mysettings.txt

Please make sure that all the files provided with the ClockGen package and the settings file are all in the same directory.

Using the ghost mode allows you to easily switch between several settings by using several settings files and creating a shortcut for each of them (on the desktop for example). Then, you just have to double-click on the shortcut to apply the predefined settings in a very simple and quick way.

Settings file for Athlon 64 / Athlon 64 FX / Opteron versions

In order to create a save file, create a text file (.txt) and edit it with a text editor.
Then write in it :

    * a signature (for example : [CG-RTM360802])
    * the FID, VID, FSB and AGP values.

Example :

[CG-RTM360802]
VID=1.425
FID=9.5
FSB=200
AGP=66

Notice that :

    * the settings are applied in the order they appear in the file. In the case of an overclock, you may want to increase the VID before setting the new CPU speed (FID and/or FSB), and in the case of an underclock, the CPU clock must be decreased before the VID.
    * each of these values is optionnal.

In the example above, the program will apply VID, then FID, then the FSB speed, and endly the AGP speed.

Settings file for Pentium III / Pentium 4 / Athlon & Athlon XP versions

In order to create a save file, create a text file (.txt) and edit it with a text editor.
Then write in it :

    * a signature (for example : [CG-ICS952607])
    * the FSB and AGP values (the AGP change needs the version to handle it).

Example :

[CG-ICS952607]
FSB=200
AGP=66

Cize podla tohoto navodu si spravis fungujuci shortcut (ikonku) na ploche, ktorej funkcnost si overis cez cpu-z. Cize pri nabootovani budes mat default frekvenciu a ked kliknes na ikonku budes mat pretaktovane cpu.

Potom start -> run -> napis regedit -> HK Local Machine -> software -> microsoft -> windows -> current version -> run -> potom tam vytvoris novu hodnotu () new -> string value -> modify -> a tam pastnes tu cestu, ktoru mas vo vytvorenej funkcnej (!) ikonke a das ju do dvojitych uvodzoviek (") rebootnes.

Voila

[miso23]

A nevies kde sa da zohnat ten zmodifikovany BIOS?

[Rusty]

Pripada ti to zlozite Skus najnovsi oficialny bios ...

[miso23]

Ten navod???NIE!Ale cez BIOS je to predsa len istejsie,nie?

[Rusty]

A mas tam najnovsi oficialny bios ? Skus htt 1x , pokles vykonu oproti 4x je asi 1% ...

[miso23]

Mam tam najnovsi oficialny BIOS v1.5,no nasobic ani Vcore menit nemozem,aj ked v recenzii aj v navode to je.Teraz mam HTT 3x ,nestaci 2x?A pojde to potom vyssie?Teraz mam HTT len 714 MHz,potom by to bolo este menej,nebude to vadit vykonu???

[-TAMY-]

ramky daj na 133,, 166 je moc

[miso23]

2-TAMY- :A nebudu mat potom tie ramky moooc malu frekvenciu???

[-TAMY-]

vyber si,, ja idem teraz na




Musel som nasjt dajake strednu cestu..

[miso23]

To HTT 1x bol "SKVELY" napad,nedostal som to ani na 230 FSB.teraz skusam na HTT 3x a Ram 133 MHz,ci to dam nad 240,ak nie tak zostanem pri RAM 166 MHz a 238 FSB.A ten odkaz mi nefunguje,neviem preco...

[robour]

To HTT 1x bol "SKVELY" napad,nedostal som to ani na 230 FSB.teraz skusam na HTT 3x a Ram 133 MHz,ci to dam nad 240,ak nie tak zostanem pri RAM 166 MHz a 238 FSB.A ten odkaz mi nefunguje,neviem preco...

Pocuj miso23 aku tam mas verziu biosu? Pozri ci tam nie je nejaka stara verzia keD to chodi tak mizerne. Podla stranok MSI by si mal mat verziu 1.5 z 10.11.2005. Zistis to napr. v evereste aky mas. Daj vsetko na default nainstaluj si LIVE UPDATE utilitku od msi a skus to flashnut.