Vratenie sa k starsiemu biosu

[a_M_D]

Ahojte!

Na predoslom Athlone (SocketA) som mal AWARD bios, ktory som po sosnuti rozbalil a pomocou bootCD dostal k prik. riadku a zadal runme.bat. Bolo to - bios som menil kedykolvek...
Teraz mam AMI. Presiel som vsak z 3.3 na aktualny 9.10 cez LiveUpdate. Ako sa vratim spat k starsiemu? Okrem How to flash the BIOS a txt obsahuje subory ADSFI715.exe a A6702VMS.330. V DOSe som zadaval ten exe, aj oba naraz - no stale sa dostanem k tomuto:

AMI FLASH Programming Utility For DOS Ver.7.00.15 Copyright (C)2002 American Megatrends Inc. All Rights Reserved.

Usage: DOSFLASH ROM_FILE /<COMMAND1>

? : Help
-B : Disable Boot Block Programming.
-N : Disable NVRAM Block Programming.
S : To save Flash ROM data into file AND quit
C : Do not destroy CMOS after programming done.
R : Force Reboot after programming done.
L : Chipset and Flash Part list.
K : Check BIOS ID.
W : Force to program EC BIOS.

Akurat prikaz S mi visiel - inac neviem co s tym, ako nato...?

[backspace]

v prikazovom riadku skus toto (neviem kde mas nahraty bios, tak to napisem akoze je na C:/ ) :

C:/ADSFI715.exe_A6702VMS.330

_ => toto je medzera (pouzi space)

- je to jednoducho nazov toho [exe][medzera][nazov biosu]

- robil som to pred chvilou a mne to slo.. napis ci to jde

EDIT: skleroza funguje = niesom nejak extra skuseny v tomto a nepametam sa ci tam ma bit aj koncovka ".exe"

[a_M_D]

Vzdy ma to hodi na tie prikazy...

[backspace]

hm tak neviem. ..som to robil presne ako ty a islo to. skus to stiahnut z netu znova - mozno poskodeny subor . inak uz neviem.

-mozno ti poradi niekto skusenejsi..

[crux2005]

Neviem ci ti tym pomozem,pretoze som Msi uz dlho nemal,ale pokusim sa.Na tej co som mal ja som flashoval bios cez disketu.natiahnes na nu novy/stary Bios a pri starte systemu das manualne prikaz flasnut bios a nahras novy z diskety.Malo by to fungovat.Samozrejme ak mas stary Bios. 8)
P.S: ja som mal vtedy Msi KT3 Ultra a AmiBios.

[-TAMY-]

ak si precitas to how to flash tak sa docitas:

WARNING!!!!!
DON'T FLASH FROM A FLOPPY DISK!!!!
DON'T FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!!
DON'T FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING!!!!

hlavne prvy odstawec,, mne to robilo to iste,, musis z HDD

EDIT: ako mas to tam vsetko napisane tak newjem oco ti ide

4. Extract the BIOS-archive that you have downloaded by double clicking to c:\test

5. Boot your system from a Win98 or WinME boot-floppy.
How to make boot floppy in case your don’t have it ready:
For Win9X, You can type [C:\ format a:/s] from the DOS prompt.
For WinMe, You can make a boot floppy from control panel--> add/remove program-->make boot floppy. Remove autoexec.bat & config.sys file if there's any.
For Win2000, there's no way to make boot floppy, so you have to either use Win9X or WinME boot floppy.
For WinXP, you can make a DOS boot disk. Go to Your Computer, right click drive A:, select Format, select copy system files.

7. When you get the A:\ prompt, type the following sequence:
C: <enter>
cd\test <enter>
C:\test> awdfl783m BIOS file
(to save or not to save old BIOS is the user’s decision)

8. Reboot your system when prompted

[a_M_D]

Viem, co sa pise v tom dokumente a aj tak uz roky nepouzivam v PC floppy!
Oba subory mam prave ze na HDD (ci uz C, alebo D), no stale skoncim u tych prikazov, z ktorych ako som aj spominal, mi tak ide "S : To save Flash ROM data into file AND quit".
V minulosti pri AWARDe hned naskocil proces flashovania a za par sekund to bolo.
Dokonca som uz skusal, ze som zamenil v subore z LIVEUpdate u Win 9.10-koveho biosu starsi subor, no zlyhalo to.
Do certa- co s tym?! BTW, OS mam Win2000 (ale to asi teraz s cistym Dosom nesuvisi)...

[a_M_D]

hm tak neviem. ..som to robil presne ako ty a islo to. skus to stiahnut z netu znova - mozno poskodeny subor . inak uz neviem.

-mozno ti poradi niekto skusenejsi..

Takze po opatovnom sosnuti suboru (tentokrat z ineho webu, nie MSI) to v pohode ide...

Vdaka vsetkym za rady!

A BTW, robil som to najma kvoli tomuto