Po otvoreni menu: Vlastnosti systemu -> Hardware -> Spravca zariadeni
v sekcii "Radice IDE ATA/ATAPI" mam nainstalovany:
NVIDIA nForce 430/410 Serial ATA Controller, krory indikuje, ze pracuje spravne.
V podsekcii "Primary Channel" v MasterDrive je instalovany HDD 160GB Seagate SATA2.
podsekcia indikuje, ze je v Transfer mode : Serial ATA Generation 2 - 3G.
Ked vsak stlacim tlacitko hned vedla "SPEED TEST" tak rychlost je len 1.5 Gb/s.
Je SATA 2 iba 1.5 Gb/s ?
jumpre na HDD su na 3 Gb/s, mam len 1 HDD
je niekde chyba ? Dakujem.
v HD Tune 2.53 : Transfer Rate : Average 59 MB/sec , Burst Rate 137MB/sec
v Info sekcii je ze : Standart: ATA/ATAPI-7 - SATA II
Active: UDMA Mode 6 (Ultra ATA/133)
postupoval som :
Win XP CZ Pro + SATA/RAID driver z FDD --> SP2 --> ASUS nForce 430 drivre z MB CD
Athlon 64 3500 AM2 + 512MB A-DATA 667Mhz
MB ASUS M2NPV-VM NVIDIA nForce430/GeForce 6150, 4x SATA2
160 GB SEAGATE Barracuda 7200.10, SATA II, 8 MB cache
DVD RW LG H42N
Je SATA 2 iba 1.5 Gb/s ?
Chyba byt tam nemala byt, to len harddisk fyzicky nestiha citat z platni vacsou rychlostou ako tych 1.5 Gbit....Vid napr TENTO porovnavaci test.
Edit: este k znaceniu-sata2 neznaci 3Gbit, pretoze 3GBit bolo az v sprcifikaci Sata2.5
Edit: este k znaceniu-sata2 neznaci 3Gbit, pretoze 3GBit bolo az v sprcifikaci Sata2.5
CPU: Intel CeleronD 2,53GHz@2.89GHz PresHOT | MB: Abit BD7 III-i845 | RAM: 2x 512MB PC4000 Gold kit OCZ VX @304 MHz 2-2-2-5| VGA: ABIT GF MX 440(64MB) core:270/mem:405 | 2x AC Fan3 TC | HDD: Samsung SpinPoint P 200GB | DVD-RW NEC 3500 AG & DVD-ROM PIONEER 106 (slot-in)| SOUND: Creative SB Live! & 5.1 Creative-repro |PSU: 300W | DISPLAY: ACeR AL 1912 (19") | HP DJ 3420 & DJ 3745
vizera to ze nieco nieje urcite v poriadku
sandra 2007 Lite v teste : Physical Disk, sa sekne a caka do
nekonecna .... po takom 7 x sa mi podari dostat sa do testu
tu je vypis z logu :
Transfer Modes Support
IO Queue Depth : 32
Block Size : 16
Width : 16-bit
Maximum PIO Mode : PIO-4
Maximum DMA MW Mode : MWDMA-2
Maximum UDMA Mode : UDMA-6
Transfer Modes Active
Current Block Transfer : 1
Current Active Mode : UDMA-6
Performance Tips
Warning 3105 : Current block size not optimal. Check settings.
----------------------------------------------------------
prekvapilo ma UDMA-6, to by mal byt SATA 1.
aj ten warning je cudny, kde sa da nastavit Block Transfer ?
V Biose sa da v sekcii SATA nastavit akurat :
Extended drive : auto/none : mam auto
Access Mode : Large/Auto : mam auto
a v sekcii Chipset :
Spread Spectrum : disable/ceneter/down : mam down
SATA Spread Spectrum : disable/enable : mam enable
co nemam sain co to je ...
Nie je nahodou tento HDD niaky exot ? hoci by to mala byt novinka 7200.10
SEAGATE Barracuda 7200.10 T-Lite 160GB, SATA II NCQ 8MB cache,
7200ot, ST3160815AS
ze by sa bil s MB ASUS M2NPV-VM ?
sandra 2007 Lite v teste : Physical Disk, sa sekne a caka do
nekonecna .... po takom 7 x sa mi podari dostat sa do testu
tu je vypis z logu :
Transfer Modes Support
IO Queue Depth : 32
Block Size : 16
Width : 16-bit
Maximum PIO Mode : PIO-4
Maximum DMA MW Mode : MWDMA-2
Maximum UDMA Mode : UDMA-6
Transfer Modes Active
Current Block Transfer : 1
Current Active Mode : UDMA-6
Performance Tips
Warning 3105 : Current block size not optimal. Check settings.
----------------------------------------------------------
prekvapilo ma UDMA-6, to by mal byt SATA 1.
aj ten warning je cudny, kde sa da nastavit Block Transfer ?
V Biose sa da v sekcii SATA nastavit akurat :
Extended drive : auto/none : mam auto
Access Mode : Large/Auto : mam auto
a v sekcii Chipset :
Spread Spectrum : disable/ceneter/down : mam down
SATA Spread Spectrum : disable/enable : mam enable
co nemam sain co to je ...
Nie je nahodou tento HDD niaky exot ? hoci by to mala byt novinka 7200.10
SEAGATE Barracuda 7200.10 T-Lite 160GB, SATA II NCQ 8MB cache,
7200ot, ST3160815AS
ze by sa bil s MB ASUS M2NPV-VM ?