Zaopjenie front audio

[ThroniX]

Zdravím,

Chcel by som si zapojiť front audio na skrinke TT Tsunami, dosku mam Gigabyte DS3-R.
Mohli by ste mi pls poradit ako to zapojiť?

Doska: (For HD Front Panel Audio)
1. MIC2_L
2.GND
3.MIC2_R
4.-ACZ_DET
5.LINE2_R
6.GND
7.FAUDIO_JD
8.No Pin
9. LINE2_L
10. GND

Na CASE sú piny:
- RETURN L
- RETURN R
- EAR L
- EAR R
- GND
- MIC VCC
- MIC IN

sorry ak sa nertafil thread

[0Ro!]

doska -> case

MIC2_L -> MIC IN
MIC2_R -> MIC VCC
LINE2_R -> EAR R
LINE2_L -> EAR L
2.GND -> GND

skus to takto a daj vediet, ale tie return L a R(line in) nemam ani sajn kam zapojit aj po pol hodine studovania manualu dosky a skrinky

[ThroniX]

Tak som to skušal ako si na pisal no nejde to ani tak.

[0Ro!]

myslim, ze viem kde je problem

MANUAL

The front panel audio header supports HD audio by default. If your chassis provides an
AC'97 front panel audio module, refer to the instructions on how to activate AC'97 functioninality
via the audio software in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."
• When using an AC'97 front panel audio module, you can use either the front or the back
panel audio connectors, but not both at the same time.
• Some chassis provide a front panel audio module that has separated connectors on each
wire instead of a single plug. For information about connecting the front panel audio
module that has different wire assignments, please contact the chassis manufacturer.

C. Configuring AC'97 Audio:
If you want to connect an AC'97 front panel audio
module, click the tool icon on the Audio I/O tab On
the Global Connector Settings box, select the Disable
front panel jack detection check box. Click
OK to activiate the AC'97 functionality.

takze zapojene by to malo byt spravne, len to treba nastavit vo Win-e v spravcovi zvuku Realtek