Inštalácia SP1 - CHYBA = 8007002

[GABO]

Tak píšem už tu lebo si naozaj neviem rady . Windows Vista Biznis edícia Originál. Pri update cez WinUpdate, alebo standalone pack SP1 my pred koncom inštalácie vyhodi chybu:

8007002.

Riešil som ju všetkými dostupnými možnosťami vrátane tejto: http://www.mydigitallife.info/2007/12/2 ... -in-vista/

Nepomohlo žiaľ nič...vie niekto pomôcť, prípadne nejaký nápad. Skontrolovaná konzistencia systému, pevného disku (250GB x 2 v RAID MIRROR), dokonca aj pamäte. Vyskúšané všetky postupy, bežne odkazované a nič proste padne.

Skúšam ešte toto:

If the installation still fails, download and extract the KB947821 update from the Microsoft Download Center. The Windows6.0-KB947821-XXX.msu file will ensure that the computer is ready to be updated. Then try again to install SP1. For information about this update, including information about how to obtain it, see http://go.microsoft.com/fwlink/?LinkId=109180.

Tu SP1 blbú asi teda nenainštalujem, alebo čo..

Ak niekto vie o niečom čo som prehliadol ... napíšte.

[Snake]

Gabo skus toto:

Kód: Vybrať všetko

If you receive Windows Update error 80070002 while checking for updates, you
need to remove the temporary update files that Windows uses to identify
updates for your computer. To remove the temporary files, stop the Windows
Update service, delete the temporary update files, restart the Windows Update
service, and then try to check for Windows updates again.

To stop the Windows Update service
You must be logged on as an administrator to perform these steps.

Click to open Administrative Tools.

Double-click Services. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.

Right-click the Windows Update service, and then click Stop.

To delete temporary update files
Click to open Computer.

Double-click the local hard disk where Windows is installed, typically drive
C.

Double-click the Windows folder, and then double-click the
SoftwareDistribution folder.

Double-click the DataStore folder to open it, and then delete all files and
folders in the folder. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.

Click the Back button. In the SoftwareDistribution folder, double-click the
Download folder to open it, and then delete all files in the folder. If you
are prompted for an administrator password or confirmation, type the password
or provide confirmation.

To restart the Windows Update service
You must be logged on as an administrator to perform these steps.

Click to open Administrative Tools.

Double-click Services. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.

Right-click the Windows Update service, and then click Start.

If the problem persists after you have followed the steps above, see this
Knowledge Base article on the Microsoft Help and Support website or go to the
Windows Update Support Center website to request support by e‑mail.

Note
Deleting temporary update files will help solve the problem, but it will
also delete the history in Windows Update. You can still see which updates
are installed on your computer by going to Installed Updates:

To see which updates are installed on the computer
Click to open Installed Updates.

//EDIT:
este skus toto ak hento by nefungovalo:

Kód: Vybrať všetko

1) Go to the Start Menu.
2) Click on Computer.
3) Open up the drive where windows is installed (usually your C drive).
4) Open the Windows Folder.
5) Scroll down a bit and locate the SoftwareDistribution folder (exactly like that).
6) Open the Download folder.
7) Open the Install folder.
8) There sould only be one file there. Right click on it and select "Run as Administrator".
9) After entering an Administrator password, run the installation, using the default values and clicking yes at the license.
10) After the installation is complete (shouldn't take more than a few minutes), restart your computer (as an added precaution, though not necessary).
11) After the computer restarts again, run Windows Update again. It should run as normal. All fixed!
I apologize for Microsoft's ineptitude. 

[GABO]

To prvé som vyskúšal - asi 5 rôznymi spôsobmi. Mne Update ponúkne SP1, ale padne s tou hláškou. Pri inštalácii SP1 Standalone mi to padne na konci s tou hláškou.

Výsledok Radinnes Tool for Windows Vista - ten rieši a kontroluje pripravenosť pre budúce updaty, SP a pod. http://support.microsoft.com/?kbid=947821 je takýto:

Checking System Update Readiness.
Version 6.0.6000.2
2008-05-20 20:37:12

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.
Checking component registry

Checking component store

Scanned 10284 components, 12817 component payload files
Summary:
Milliseconds: 539935
No errors detected
Customer Experience report successfuly uploaded. Thank you for participating. For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

-----------------------------------------------------

Pozeral som aká chybná hláška sa v EVENTE objaví pri páde a je to táto: VDS Dynamic Provider 2.0

The provider failed while storing notifications from the driver. The Virtual Disk Service should be restarted. hr=80042505 službu som reštartol a skúšam znova

Skúsim ešte to druhé čo tam odporúčaš.....len akosi nechápem bodu 9) After entering an Administrator password, run the installation, - znamená to spustiť inštaláciu SP1 standalone?

[Snake]

nie, daj tahat updaty z Windows Updateu (mal by padnut) chod do tej zlozky a tam by mal byt exac, a na ten klikni pravym a daj run as admin

[GABO]

Hmm ok skúsim ale on nepadne, on padne už pri instale VISTY s hlaškou interný problém (cez Win Update konzolu). Pri standalone sa to javí takto (status bar je pri konci):

[GABO]

Ok takže sa nám nič nepodarilo ....

[GABO]

Tak po XXX nepodarkoch som opäť vyskúšal stiahnuť Readiness Tool for Windows Vista a spustiť - 70MB a cca 15 minút si to pracuje. Po tom netreba žiaden reštart, ale vyhľadať updaty alebo odloženú SP1 aktualizáciu a spustiť..na moju radosť to prešlo tak som myslel, že odpadnem .

[Memnon]

takze uz ti ten service pack slape ci stale nist?

[Snake]

Ide mu

[Memnon]

mam postupovat tym istym sposobom aj ked mam SP1 stiahnute?
najak rada jak to instalnut by sa zisla , zatial idem googlit

EDIT: no po dlhej velmi dlhej chvilke googlenia som sa dozvedel ze po stihnuti dacoho takehoto KB947562 ma byt zvysena kompatibilita s uploadnutymi vecami
po instalacii zacalo aktualizovat vsetko jak dive 39 upadateov naraz takze uvidim ci medzi nimi bude konecne aj ocakavany SP1 pripadne ci pojde instalnut z mojho stiahnuteho updatu

az budu vysleky tak aktualizujem tento post

[Memnon]

potom kludne spojte moje posledne dva posty akurat aby bolo vidiet ze k cvomu som dospel

no takze ziadana zmena nainstaloval som cca 45 doplnkovych updatov na vsetko mozne co od MS v kompe mam
kukal som aj ze s cca 15 softami nainstalovanymi v kompe nebude SP1 spolupracovat ale ani odinstalovanie kodeku na zvuk nepomohlo cez win upadte hodi chybu 8024200D a klasickym sposobom hodi 80070002
mam chvilami pocit ze moj problem vyriesi az windows 7 celkovo je to divne

EDIT: na zaver po nespocetnych updatoch pokusoch restartoch a dowloadoch je SP1 uspesne instalovany

[GABO]

No tento problém (myslím až tak hlbokú, že fakt nejde opraviť bežnými spôsobmi) ma dosť málo userov...v podstate si dospel k vyriešeniu rovnako ako ja pokus, omyl a vyskúšanie aj svatých updatov už asi

[Cyanide_Power]

Nechcel som zakladať nový thread kôli tomu takže:
Mám vistu ultimate x64, snažím sa nainstalovať SP1 no nejde pretože vypisuje túto chybu 0x800F082F ...
Respektíve, načíta ale pri začiatku inštalácie vyhodí tú chybu.