GPU-Z

[STENLY]

GPU-Z 0.3.5

Download

Spoiler: ukázať

ATI Radeon HD 5870 (Cypress) fully supported (includes voltage monitoring)
Added or improved support for NVIDIA FX5500, 9400 GT, G73, GTS 240, GT 140, FX 1800, GT 120 (Apple), FX 380, FX 350, GTX 295 Single PCB, Quadro CX, FX 5800, FX 4800, FX 3800, GTX 180M, GTX 260M, FX 2700M, G 110M, GT 120M, GT 220M, FX 1700M, G 105M, MCP79MX
Added or improved support for ATI HD 4730, HD 4650 AGP, M92, M96, M98
Added clock reading for Intel i910, i915, i945, 946
Added support for DDR3 detection on G9x
Added monitoring support for RV7xx based mobile chips
Voltage controller "slaves" are now called "phases"
Added Intel Havendale detection
Fixed BIOS parsing on some newer HD 4870 cards
Added voltage monitoring support for MSI N275GTX Lightning

[STENLY]

GPU-Z 0.3.6

Download

Spoiler: ukázať

Added Infotips, they can be turned off in the system menu
Added preliminary support for ATI Radeon HD 5900 (Hemlock), HD 5600 (Cedar), HD 5300 (Redwood)
Added full support for HD 5850, HD 5770, HD 5750
GPU-Z no longer crashes on ATI ULPS enabled CrossFire configurations
Fillrate Pixel, Fillrate Texel, Memory Bandwidth will now correctly recalculate when clocks change
Bus Interface, ATI shader count is now periodically refreshed
Added support for HD 5850 voltages
Second voltage on HD 5870 correctly named VDDCI
ATI clock reading code fixed
Fixed default clock reading on HD 5850
Added Mutex to avoid collisions on long I2C operations
Added basic detection for a lot of NVIDIA card fakes
Added detection for ATI FireGL V7600, M92, RS880
Added detection for NVIDIA GT 130, 9600 GE, Tesla C1060, G 220, GT 220, NVS 3100, GTS 160 M, NVS 160M, NVS 150M, G105M, GT 240M, G105M, G210M, G310M, ION LE
Fixed die size and transistor count on G72 M

[crux2005]

GPU-Z 3.0.7:
http://www.techpowerup.com/downloads/16 ... 0.3.7.html" onclick="window.open(this.href);return false;

Spoiler: ukázať

Zmeny:

Added Infotips for sensors
Fixed crash when ATI ULPS CrossFire enabled
Added full support for ATI HD 5970 (Hemlock)
Added full support for NVIDIA GeForce GT 240 (GT215)
Added "ULPS active" note to CrossFire status when ULPS active
Fixed overclocks via CCC not showing correctly
Added checkboxes to show availability of CUDA, PhysX, OpenCL and DirectX Compute
Improved memory type detection for GT 216, GT 218
Added voltage monitoring support for HD 5770
Disconnected fan now shows correctly in sensors (when detectable via hardware)
Improved accuracy of ATI GPU load monitoring
Added detection for ATI RV380/RV530 cards relabeled to NVIDIA 9400/9500/9600 GT
Added support for NVIDIA 9300 SE, NVS450, GT 240, GTS 250M, G102M
Added support for Intel G41

Medzi novinky patrí schopnosť zobraziť využitie VRAM. Zaujímavé je ale, že to funguje aj pod Windows Vista/7, kde by to kvôli virtualizácii nemalo byť možné. Obrázok z môjho testu je nižšie. GRiD na max detailoch v 1920x1200, 16xAF a 8xMSAA...


Spotreba VRAM len okolo 560MB, čo je pomerne málo. Skôr by som povedal, že ten údaj nie je presný.

[Fullesh]

GPU-Z 0.3.8

http://www.techpowerup.com/downloads/17 ... 0.3.8.html" onclick="window.open(this.href);return false;

Spoiler: ukázať

Zmeny:

Added framework for translations in GPU-Z, to do that we need your help. Please go to tpu.me/forums/forumdisplay.php?f=72 to submit contributions in your language
Added sensors to monitor GPU load percentages on NVIDIA
Fixed startup on Windows 2000 (DLL not found)
Improved detection/added sensors for ATI M86
Fixed several NVAPI crashes
Fixed crash when PhysX not available
GPU-Z can now be set in its system menu to be always on top of other windows

[Papek]

na Radeone 5750 mi nevypisuje podporu pre OpenCL

[STENLY]

GPU-Z 0.3.9

Download

Spoiler: ukázať

* Added localized tooltips in the languages: AM, AR, BG, CN, DE, FA, FR, IT, PT, RS, RU, TR, UA. Default language is your system language, you can change this setting in the system menu of GPU-Z.
* Added support for ATI HD 5830, HD 5770, HD 5750, HD 5670, HD 5570, HD 5450, HD 4860, HD 4750, Mobility HD 3430, M97, Mobile HD 5850, 5730, 5650, 5470 (Broadway, Madison and Park)
* Added support for NVIDIA GeForce 6200A, GTS 250, 9800S, 205, 310, GT 320, GT 240, GTS 360M, 230M, 330M, 240M, G105M, Quadro NVS170M, G210M, GTS 250M, future MCP, more ION variants.
*

Added support for Intel GMA500, Clarkdale, Arrandale
*

Added detection for variants of NVIDIA NV41, G94, G98, ATI RV350, RV370, R480, RV515. Most of them used on fake cards relabeled to NVIDIA 9x00 series.
* Improved default clock BIOS parsing on NVIDIA
* Fix for incorrect default clocks on HD 5000 Series
* Fixed incorrect real-time clock monitoring on some HD 5000 cards
* Added more accurate real-time clock monitoring function for NVIDIA
* Improved OpenCL detection on ATI R700, RV790, all HD 5000 cards
* Added temp. monitoring support for some Intel IGPs
* Improvements to CUDA detection
* Removed memory chip input fields from VGA BIOS Upload

[1adad1]

GPU - Z 0.40
http://www.pc.sk/modules.php?name=quick ... ad&id=2385

[STENLY]

GPU-Z 0.4.2

DOWNLOAD

Spoiler: ukázať

* Fixed an issue on all NVIDIA cards that would sometimes cause them to lose fan control when GPU-Z is running. Please don't run pre-0.4.2 and 0.4.2 at the same time, this might result in incorrect readings in the 0.4.2 window.
* Fixed system crash on MSI HD 5830 TwinFrozr II
* Validation upload now uses Unicode for entered name
* Reverted memory bandwidth calculation introduced in last version. It introduces too much confusion, we will go with what all companies use in their marketing material, even though we believe it is not correct. Using power of 10 again now, 1 GB/s = 1,000,000,000 Bytes per Second.

[STENLY]

GPU-Z 0.4.3

DOWNLOAD

Spoiler: ukázať

Added full voltage controller monitoring for GeForce GTX 480
Added real-time clock monitoring for GF100
Added detection for vendor GALAXY
Complete revamp of voltage controller architecture. Adds voltage monitoring for many ATI & NVIDIAcards and generic monitoring method for NVIDIA cards via driver.
Added support for >4 GB memory on NVIDIA
Fixed memory clock reading on some HD 5670 cards
Fixed thermal sensor count on some ATI Evergreen models
Fixed incorrect default clock reading on some ATI Evergreen models
Added detection for NVIDIA GTX 465, GT 320M GT 335M, ION variant, GT 340, Tesla C2050, Tesla M2050, GTX 285M, GT 325M, Quadro FX 880M, Quadro FX 1800M
Added detection for ATI HD 5570, Mobility 4550, Mobility 5870, HD 4250, HD 4290, FirePro V7750
Added detection for Intel GMA 3150
Added fix for ADT7473 coldbug (GTX 480) via commandline parameter /fixcoldbug
Added OCP adjustment for CHL8266 (GTX 480). Use it via command line parameter /chl8266ocp without parameter to query, with numeric value seperated by space to set. This is a permanent change that will not be reverted by powering down the system.
Added languages Hungarian and Spanish
Updated languages French, Italian, Russian

[FF6]

GPU-Z 0.4.4
Download: http://www.techpowerup.com/downloads/18 ... .0.4.4.exe

Spoiler: ukázať

Added support for NVIDIA GeForce GTX 460, GT 330, GT 315, GT216 based ION
Added support for AMD HD 5670 (Juniper), Mobility HD 5430, Mobility 4200, Mobility 4100
Added PowerColor hardware giveaway
Added die size measurement for NVIDIA GF100
Added option to GPU-Z's system menu to show temperatures in °F
Fix for BIOS reading on ATI
Fixed decimal points in ADT7473 reading
Fixed crash on GeForce 8300 IGP
Added clock monitoring for RS780 variants
Improved clock monitoring for ATI R6xx architecture

[STENLY]

GPU-Z 0.4.5

DOWNLOAD

Spoiler: ukázať

Fixed shader count on NVIDIA GTX 460, added die size & transistors
Fixed ROP count on AMD Redwood
Added support for ATI FirePro V7800, ATI IGP 320M, ATI FireGL X1, ATI HD 4200 variants
Added launch on Windows startup function accessible via system menu and supporting UAC
Autoupdater will not check for update when no Internet connection detected
Fixed browser not starting correctly from autoupdater
Screenshot detection that promotes GPU-Z's own screenshot upload feature
Sensor data collection limited to 6 hours of data per sensor (~250 KB)
Shortened Clevo PCI vendor name

[STENLY]

GPU-Z 0.4.6

DOWNLOAD

Spoiler: ukázať

Added MSI hardware giveaway
Fixed temperature readings getting stuck on ADT7473 sensor (GTX 400 cards)
Fixed broken BIOS reading on all cards
General improvements to Intel support, still far from perfect
Added support for ATI FirePro V8750
Added support for GeForce GTS 455, GTS 450, GT 440, GT 430, GT 420, GT 330, GT218 based ION, GTX 470M, GTX 460M, GT 445M, GT 435M, GT 425M, GT 420M, GT 415M, GeForce 310M
Added basic detection for AMD Radeon HD 6000 Series
Improved handling for unknown NVIDIA cards
Added fan RPM monitoring for NVIDIA cards

[STENLY]

GPU-Z 0.4.7

DOWNLOAD

Spoiler: ukázať

Improved support for AMD Radeon HD 6850 and HD 6870
Added support for NVIDIA GeForce GT 430, GT 420
Fixed default clock reading on Fermi architecture cards
Added voltage controller support for Colorful iGame GTX 460
Added PCI Vendor detection for Colorful
Added TMU count and die size for GF106
Synchronization mutexes are global now
Improved stability when running multiple instances of GPU-Z / Fixed "the driver has been marked for deletion" error

[Papek]

ked pustim gpu-z pri pretaktovanej grafike 5750 nad 830 MHz, zatuhne mi PC. wtbh? pritom vsetko ostatne mi ide v poho, furmark, hry, ...

[STENLY]

GPU-Z 0.4.8

DOWNLOAD

Spoiler: ukázať

Added support for NVIDIA GeForce GTX 580 and future GF104 variants
Updated TMU/Texture rate calculation method. Please report any errors in the forums
Fixed memory clock monitoring on HD 6850, HD 6870
Fixed label corruption on cards without any shaders
Fixed rare CrossFire detection bug on ancient ATI drivers
Added voltage monitoring fallback for ATI cards with unsupported voltage controller
Updated PCI vendor ID for PowerColor
Removed MSI giveaway