S T420 mi bol dodaný tento HDD ako systémový. Po dvoch dňoch používania HDD podľa SMARTu dosiahol hraničnú hodnotu C4 / 196 Reallocated_Event_Count. Seagate a Lenovo utilitka hlásia, že disk je v poriadku. V logu Lenova však o hodnote nie je ani zmienka a Seagate dá len PASS. Ostatné softíky ale protestujú. Čo s tým? Nejako extra by ma to nehnevalo, len čím je číslo vyššie, tým horšie disk pristupuje do priečinkov, dlhšie rozmýšľa, kým niečo otvorí / začne kopírovať / presúvať / mazať.
https://plus.google.com/photos/10808205 ... 5958171410
https://plus.google.com/photos/10808205 ... 7261810162
https://plus.google.com/photos/10808205 ... 4180694034
smartctl výstup:
Kód: Vybrať všetko
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.4 series
Device Model: ST9500420AS
Serial Number: 5VJEZB9S
Firmware Version: 0003LVM1
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Dec 20 18:58:09 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 39) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 100 034 Pre-fail Always - 102004743
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 119
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 061 060 030 Pre-fail Always - 1496716
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 251461745246284
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 118
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 061 049 045 Old_age Always - 39 (Lifetime Min/Max 22/43)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 6
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 109
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2054
194 Temperature_Celsius 0x0022 039 051 000 Old_age Always - 39 (0 17 0 0)
195 Hardware_ECC_Recovered 0x001a 038 036 000 Old_age Always - 102004743
196 Reallocated_Event_Count 0x000f 100 100 030 Pre-fail Always - 43 (24290, 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 70% 76 -
# 2 Extended offline Completed without error 00% 61 -
# 3 Short offline Completed without error 00% 55 -
# 4 Vendor offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.