Ray zase zapracoval 1.2.6.930
[+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or
if you have a problem with low level overclocking. Remember this option will be active only if your video board support
Overdrive version 3 and ATI HotKey poller service is started.
[+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also
remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be
resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via
game profiles it is a safest way.
[*] Updated color correction hotkeys, to support new color correction formula
[*] Updated 3D renderer and benchmark module.
[F] Fixed situation when 3D renderer shows artefacts after using benchmark module.
[+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There
are no way to activate them for old video board, so do not ask me about it.
[*] Updated auto FAN control functionality for R5xx boards.
[*] Updated system information module. Added basic information about Overdrive support.
[F] Fixed broken OSD functionality for Direct3D8 games and applications.
[F] Fixed detection of current 3D profile with no GI option included
[*] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game
or application is active and OSD enabled.
[*] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor
(like 9600XT/9800XT)
[F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters.
[F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations.
[+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted.
Note some modes can be disabled in certaint situation, such as display rotation
[+] Added support for "Perserve Aspect Ratio" option in Display module. If supported by LCD or DFP display.
[F] Fixed bug with hotkey for decreasing contrast in color correction procedure.
[+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware)
[*] Monitoring Graphs window now will be automaticaly reopened after suspend mode if it was active before entering
into Suspend mode.
[+] Added option to Force TV Detection.If you are using an older TV or one that has non-standard inputs that
may not be automatically detected, use Force TV Detection.
[+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module.
[*] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not
expect a lot Smile
[*] Updated Core names database. Added information about RV570/RV535 chips.
[+] Added option to automaticaly shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in
ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting
clocks and voltages to default state.
[F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode.
[+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other lanugages.
[+] Added new command line parameters:
/LDSD - Load "Default Single Display" profile
/EXD - Turn Extended Desktop On/Off
[+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading.
Ati Tray Tools
Ati Tray Tools
8F. Nepocujes , nevidis , nevies. GUGL nieje iba vyhladavanie , je to ZIVOTNA FILOZOFIA. GUGL som JA.
hm
PLS ak ma niekto 1800XT alebo 1900XT a XTX potrebujem helpnut 
Som chcel taktovat konecne cez ATT - nasledovny problem :
vypnem nastalo ATI hotkey pooler, nastavim 2D takty na 500/500. 3D takty plynule nastavim az takmer na DEFAULT hodnoty pri 3D t.j 620/720.
Avsak ked chcem ist vyssie hned mi to zamrza a black screen.
Na ATT fore mi pisali, ze ci dviham aj voltaz pre 3D mod, v 2D mode je 1,2v napriklad pre jadro... ale ako mam sakra vediet kolko ma byt pri 3D mode?:) a + navyse ked chcem taktovat? detto pri pamatiach.
Diky za tipy
Som chcel taktovat konecne cez ATT - nasledovny problem :
vypnem nastalo ATI hotkey pooler, nastavim 2D takty na 500/500. 3D takty plynule nastavim az takmer na DEFAULT hodnoty pri 3D t.j 620/720.
Avsak ked chcem ist vyssie hned mi to zamrza a black screen.
Na ATT fore mi pisali, ze ci dviham aj voltaz pre 3D mod, v 2D mode je 1,2v napriklad pre jadro... ale ako mam sakra vediet kolko ma byt pri 3D mode?:) a + navyse ked chcem taktovat? detto pri pamatiach.
Diky za tipy
Ja pouzivam Rivatuner poslednu verziu a ten exac nechavam spusteny. Ati defaultne ide 2D mode a pri hrani hier a pretaktovani , sa vyuziva 3D. Cez ATT mi to zamrzalo stale.
8F. Nepocujes , nevidis , nevies. GUGL nieje iba vyhladavanie , je to ZIVOTNA FILOZOFIA. GUGL som JA.
Ati Tray Tools 1.2.6.940
1.2.6.940
[F] Fixed bug when manual fan control can not be applied
[*] Updated some translation files
[F] Fixed Old I2C Method to be compatible with X1xxx boards in memory voltage control procedure
[+] Added ability to change how ATT will react on "ATI HotKey poller" service. (in General options)
[*] Updated Overdrive control procedure. Now you can set any available clocks for OverDrive even beyond the Catalyst limits!
And change GPU Voltage too.
[+] Added option to apply OverDrive settings on startup
[+] Added Portuguese (Brazilian) and Belorussian translations
[F] Fixed bug when manual fan control can not be applied
[*] Updated some translation files
[F] Fixed Old I2C Method to be compatible with X1xxx boards in memory voltage control procedure
[+] Added ability to change how ATT will react on "ATI HotKey poller" service. (in General options)
[*] Updated Overdrive control procedure. Now you can set any available clocks for OverDrive even beyond the Catalyst limits!
And change GPU Voltage too.
[+] Added option to apply OverDrive settings on startup
[+] Added Portuguese (Brazilian) and Belorussian translations
8F. Nepocujes , nevidis , nevies. GUGL nieje iba vyhladavanie , je to ZIVOTNA FILOZOFIA. GUGL som JA.
ATI Tray Tools - 1.2.6.955
ATI Tray Tools - 1.2.6.955
[+] Added new overclocking method for X1xxx boards with Overdrive support. "Driver Level overclocking".
Near the same method first was introduced in RivaTuner and then in ATITool.
What will do this method?
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory. Only for hardware with voltage regulator
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not reset by that service in 3D games
5. With this method clocks shouldn't not resets when you play any video files (tested on my 1800XT), but only if ATI HotKey Poller is started
6. More stable overclocking.
7. You can create full featured overclocking profiles in ATT and use them in game profiles.
8. For Video board without OverDrive support ATT will use alternative method for overclocking like used in ATI WinClk and also in last release of RivaTuner.
But this method has some disadvantages:
1. Big steps for clock regulators. For GPU about 6Mhz and about 9Mhz for Memory.
2. Not all voltages can be applied. Try not to set voltage less than 1.1000. Voltage can not be applied if video doesn't support voltage control.
[*] Improved Overdrive 3 support. Now ATT will calculate nearest possible clocks before applying.
[+] Added Japanese, Finnish translations
[+] Added option to include clocks in Overclocking Profile. Now you can create profile just for FAN or for Voltage control without GPU and Memory clocks. "C" means that profile has Clocks included.[*] Updated user interface in some dialog windows.[*] Updated "New AA & AF Methods" database. Added a lot of experimental options to improve antialiasing methods like SAAOM, EATM.
[+] Added new overclocking method for X1xxx boards with Overdrive support. "Driver Level overclocking".
Near the same method first was introduced in RivaTuner and then in ATITool.
What will do this method?
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory. Only for hardware with voltage regulator
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not reset by that service in 3D games
5. With this method clocks shouldn't not resets when you play any video files (tested on my 1800XT), but only if ATI HotKey Poller is started
6. More stable overclocking.
7. You can create full featured overclocking profiles in ATT and use them in game profiles.
8. For Video board without OverDrive support ATT will use alternative method for overclocking like used in ATI WinClk and also in last release of RivaTuner.
But this method has some disadvantages:
1. Big steps for clock regulators. For GPU about 6Mhz and about 9Mhz for Memory.
2. Not all voltages can be applied. Try not to set voltage less than 1.1000. Voltage can not be applied if video doesn't support voltage control.
[*] Improved Overdrive 3 support. Now ATT will calculate nearest possible clocks before applying.
[+] Added Japanese, Finnish translations
[+] Added option to include clocks in Overclocking Profile. Now you can create profile just for FAN or for Voltage control without GPU and Memory clocks. "C" means that profile has Clocks included.[*] Updated user interface in some dialog windows.[*] Updated "New AA & AF Methods" database. Added a lot of experimental options to improve antialiasing methods like SAAOM, EATM.
8F. Nepocujes , nevidis , nevies. GUGL nieje iba vyhladavanie , je to ZIVOTNA FILOZOFIA. GUGL som JA.
ATI Tray Tools 1.2.6.964
Version 1.2.6.964
[F] Fixed procedure to display memory clocks as DDR in Overclocking Window.
[*] Updated tray icon
[+] Added hotkeys to switch monitor rotation between 0/90 and 0/270
[+] Added Romanian translation
[*] Updated existing translation files
[+] Added Memory IO voltage control for X1xxx video boards.
[+] Updated GUI interface for some dialog boxes
[*] Updated core names database
[+] Added 500ms delay before restoring previous 3D settings after exiting from game. If this included in game profile.
[*] Updated text rendering procedure in FlashOSD module
[*] Updated overclocking support for RV570 and RV560 boards. Thanks Unwinder for help and information.
Link
[F] Fixed procedure to display memory clocks as DDR in Overclocking Window.
[*] Updated tray icon
[+] Added hotkeys to switch monitor rotation between 0/90 and 0/270
[+] Added Romanian translation
[*] Updated existing translation files
[+] Added Memory IO voltage control for X1xxx video boards.
[+] Updated GUI interface for some dialog boxes
[*] Updated core names database
[+] Added 500ms delay before restoring previous 3D settings after exiting from game. If this included in game profile.
[*] Updated text rendering procedure in FlashOSD module
[*] Updated overclocking support for RV570 and RV560 boards. Thanks Unwinder for help and information.
Link
8F. Nepocujes , nevidis , nevies. GUGL nieje iba vyhladavanie , je to ZIVOTNA FILOZOFIA. GUGL som JA.
ATI Tray Tools 1.2.6.977
EDIT Bikermotyl : Vyborne
Aj s prekladom 
Kód: Vybrať všetko
http://atitray.fangel.ru/b1/attsetup.exe[*] Minor GUI updates
[*] Updated Driver level Overclocking support for RV560/RV570 boards.
[+] Added test support for voltage regulation on X1950XTX boards
[*] Added monitoring plugin "X1xxx Voltages" to provide monitoring for GPU/Mem voltages on X1xxx boards.
Known Issues:
1950Xt not full in supported
AVAST AV may detect a false positive, Virus. It's the integrate Smart Function.
-Mensie zmeny vo vzhlade
-Aktualizovane pretaktovanie X1950XTX kariet cez ovladace
-Pridana testovacia podpora pre zmenu napetia na
X1950XTX
-Pridany monitorovaci plugin pre napetia na kartach rady
X1xxx
-X1950XT este nieje plne podporovana
-Avast antivirus detekuje nespravne ako virus
[*] Updated core names database
[*] Updated existing translation files
[+] Added Polish translation
[*] Updated Advances Tweaks databases
[F] Fixed procedure to collect monitroing sources from ATT in "MotherBoard Sources" FlashOSD Plugin.
Owners of X1950XTX please check is it possible to change voltages in Overclocking window.
-Aktualizovana databaza nazvov cipov
-Aktualizovane existujuce preklady
-Pridany polsky preklad
-Aktualizovana databaza "Advanced Tweaks"
-Opravena preocedura citania monitorovacich zdrojov z ATT v "MotherBoard Sources"
EDIT Bikermotyl : Vyborne
Aj s prekladom 
Kód: Vybrať všetko
http://www.sendspace.com/file/3ovahh[*] Updated existing translation files
[+] Added Polish translation
[*] Updated Advances Tweaks databases
[F] Fixed procedure to collect monitroing sources from ATT in "MotherBoard Sources" FlashOSD Plugin.
[F] Fixed current 3D profile detection in non CCC compatible mode
[*] Updated Monitoring Graphs module to support external plugins. This excellent idea was first implemented in RivaTuner by
Unwinder. ATT and RT plugins are incompatible.
[+] Added example Monitoring Graphs plugin "Memory Monitor". Which can monitor global memory statuses like Memory Load %,
Physical memory Available,Page File usage, Virtual memory usage. Source code included.
[+] Added monitoring pluginsd "HDD Temperature". Allows to monitor temperature of HDD disks via S.M.A.R.T.
[*] Updated plugins SDK to support new monitoring graphs plugins
[*] Minor GUI updates
[*] Updated Driver level Overclocking support for RV560/RV570 boards.
[+] Added test support for voltage regulation on X1950XTX boards
[*] Added monitoring plugin "X1xxx Voltages" to provide monitoring sources for GPU/Mem voltages.
[*] Updated installation interface
[+] Added new configuration option. "Disable using OverDrive in "Driver Level" overclocking mode". This option can be useful
if your video board has support for OverDrive, but ATT unable to overlock using "Driver Level" mode. Can be changed in
atitray.ini or at installtion process.
[*] Updated Overdrive 3 support detection procedure.
[*] Updated Core Names database. Added infotmation about RV610/M74/M72/M76/RV630 chips.
[*] Updated registry handling function under CCC compatibly mode
[*] Added test support for Vista 32bit. Not all of functions will work under Vista at this time.
[-] Audio recorder and Volume control functionality disabled because of incompatible issues under Vista.
[*] Updated Adavnced Tweaks registry editor to support Windows Vista
[+] Added new tweaks database "Avivo Tweaks" for Windows Vista only!
preklad dost na houby ale snad pochopite[*] Aktualizovane preklady
[+] Pridany polsky preklad
[*] Aktualizovana databaza Advances Tweaks
[F] Opravena procedura zberu monitorovacich zdrojov z ATT v "MotherBoard Sources" plugine
[F] Opravena detekcia aktualneho 3D profilu v CCC nekompatibilnom móde
[*] Aktualizovany modul Monitoring Graphs pre podporu externych pluginov. Tato vyborna myslienka bola prvykrat implementovana Unwinder-om v
RivaTuner-i. ATT a RT pluginy su nekompatibilne.
[+] Pridany ukazkovy plugin v Monitoring Graphs "Memory Monitor". Dokaze monitorovat stavy systemovej pamate ako napr.: Vytazenie
pamate v %, dostupna fyzicka pamat, vyuzitie strankovacieho suboru, vyuzitie virtualnej pamate. Zdrojovy kód prilozeny.
[+] Pridany monitorovaci plugin "HDD Temperature". Umoznuje monitorovat teplotu pevnych diskov cez S.M.A.R.T.
[*] Aktualizovany SDK pluginov pre podporu novych monitorovacich pluginov
[*] Mensie aktualizacie GUI (grafickeho rozhrania)
[*] Aktualizovana podpora pre pretaktovanie pre RV560/RV570 jadra cez ovladace.
[+] Pridana testovacia podpora regulovania napajania na X1950XTX kartach
[*] Pridany plugin monitorovania "X1xxx Voltages" pre monitorovanie GPU/Mem napati
[*] Aktualizovany vzhlad instalacie
[+] Pridana nova moznost nastavenia "Disable using OverDrive in "Driver Level" overclocking mode". Toto nastavenie moze byt uzitocne
ak vasa karta ma podporu OverDrive, ale nieje mozne pretaktovat v "Driver Level" móde (cez ovladace). Mozno zmenit v
atitray.ini alebo pri instalacii.
[*] Aktualizovana procedura detekcie podpory Overdrive 3
[*] Aktualizovana databaza nazvov jadier. Pridane informacie o RV610/M74/M72/M76/RV630 cipoch.
[*] Aktualizovana funkcia manipulacie registrov v CCC kompatibilnom móde.
[*] Pridana testovacia podpora pre Vistu 32bit. Nie vsetky funkcie budu teraz fungovat pod Vistou.
[-] Audio recorder a Volume control funkcie zakazane z dovodu problemov nekompatibility pod Vistou.
[*] Aktualizovany editor Adavnced Tweaks pre podporu Windows Vista
[+] Pridana databaza novych tweak-ov "Avivo Tweaks" iba pre Windows Vista!
/Edit: na zadanom linku uz verzia 1.3.6.1012
