canyon CN-7N0ALSR4 sata driver

[rendis]

mam tuto dosku :
http://www1.canyon-tech.com/products/sh ... N-7N0ALSR4
kupil som sata disk hitachi 250Gb, ale win xp nema na sata driver, original instalacne cd k maticnej nemam. Viete mi poradit ako zistim aky sata a raid controller je na tej doske ?, alebo este lepsie odkial nan ziskam driver ?

[AjsTi]

Stiahnes si Everest on Ti povie co mas za hw a potom mozme hladat driver na sata. Ale predpokladam , ze tam mas silicon image 3112.

[rendis]

Everest mi ukazuje bludy. JE to doska canyon, ale on to vidi takto :

Motherboard Properties
Motherboard ID 10/11/2004-nVidia-nForce-6A61BB01C-00
Motherboard Name Biostar M7NCD/M7NCD Pro/M7NCD Ultra

Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2667 MB/s

Memory Bus Properties
Bus Type Dual DDR SDRAM
Bus Width 128-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 5333 MB/s

Chipset Bus Properties
Bus Type HyperTransport v1.0
Bus Width 8-bit

Motherboard Manufacturer
Company Name Biostar Group
Product Information http://www.biostar.com.tw/products/mainboard/index.php3
BIOS Download http://www.biostar.com.tw/support/bios/ ... socket=775

[rendis]

prave pozeram, ze tie dosku su takmer totozne. idem skusit ten driver z biostaru.

[rendis]

driver z biostaru neje dobry.

[AjsTi]

Pouzivaj EDIT: Stem vypis aky tam mas SATA radic , ak Ti mam pomoct.
EDIT: No radic som myslel. :roll:

[rendis]

Ved praveze nemam ziaden sata driver, o to ide, ze ho neviem zohnat.

[Cvacho]

How to set up SATA/SATA RAID as Windows Booting Device (for mainboards powered by Silicon Image SATA RAID)?
1. If you select "SATA" at "Sil3114 S-ATA Control" BIOS Setup menu and intend to use normal SATA as booting device, please prepare one piece of clean floppy diskette.

* Follow the path "SIL3114" -> "DRIVE" to enter the subdirectory "NONRAID" on driver CD.
* Copy all the files under "NONRAID" subdirectory to the clean floppy diskette.
* Start installing Windows.
* Press "F6" when Windows OS installation guides the user to do so.
* Insert the floppy diskette when the screen shows the message asking you doing so.
* Follow the on-screen instructions to complete the installation.

2. If you select "SATA RAID" at "Sil3114 S-ATA Control" BIOS Setup menu and intend to use SATA as booting device, you can use RAID driver floppy diskette that we attached with the shipped motherboard.

* Start installing Windows operation.
* Press "F6" when Windows OS installation guides the user to do so.
* Insert the floppy diskette when the screen shows the message asking you doing so.
* Follow the on-screen instructions to complete the installation.

3. If you intend to use SATA under SATA RAID, please press "CTRL-S" at the very beginning to set up the type of RAID when there's request message from the screen. Then, select "SATA RAID" at "Sil3114 S-ATA Control" under "Genie BIOS Setting" menu. The following procedure to install the Windows operating system will be the same.

* Start Windows installation.
* Press "F6" when Windows OS installation guides the user to press this function key if you intend to install the OS onto SATA
* Insert the floppy diskette when the screen shows the message asking you doing so.
* Follow the on-screen instructions to complete the installation.

co tak skusito toto ? : http://www.siliconimage.com/support/sup ... =2&osid=4&

[rendis]

uz som zistil ze sata controller neje sillicon

je to via vt6420

[AjsTi]

Tak staci kusok guglenia a ovladac mas.

[rendis]

ten som uz skusal, skusal som aj verziu vt6420 v550, ani ta nejde, skusal som aj driver zo stranky biostar, ani ten nejde, skusal som aj rozne sata drivery pre nforce chipsety, nic nefungiruje. Vo win v device manageri mi ukazuje stale :

scsi and raid controllers :
VIA ATA/ATAPI host controller
(!) VIA serial ata raid controller

niekedy (ked odinstalujem nforce driver) aj
other devices :
(!) serial ata raid controller

v biose mam povolene sata. Po kazdom starte, pri bootovani, medzi memory testom a pred natahovanim winu mi na kratko ukaze nieco ako:

VIA SATA RAID CONTROLLER vt6420 , via technologies
pod tym je zoznam, kt. su primary a slave raid0 a raid1 a pri kazdom napisane, ze nenaslo takyto device.

[AjsTi]

Ehm , mas zapnute v biose SATA vobec ? To mi skor pripada , ako by si v biose nepovolil ten radic , pripadne na doske ak mas jumper.

[rendis]

ajsti ty stale sa opytas na to co som predtym prave povedal. Ved si precitaj co pisem predtym ako daco odpovies.

[AjsTi]

Hups , prehliadol som , to. Stava sa aj lepsim , sorry. Nasiel som tu nejaky posledny.

[rendis]

ok skusim aj tuto verziu 530, ale myslim, ze to nepomoze, vyzera to tak, ze ta doska a

chipset nforce2 nepodporuje "SATA II"

a nic s tym nespravim.