Nechce naštartovať systém

[kLemOo]

Sorry ak som to dal do zlej sekcie ale hladal som najbližšiu súvislosť.
Mám problém, zapnem PC, vyhodí sa hneď prvá obrazovka na ktorej mi vypíše shutdown..15second a PC sa vypne, nepustí ma ani do setupu proste sa len vypne, prikladám aj screen

22042011189.jpg

Ak niekto vie v čom môže byť chyba a či je vôbec možná oprava bez nových komponentov tak ďakujem za rady.

[killswitch]

resetni CMOS. vybrat baterku na chvilku.

[shiro]

ak by sa to opakovalo aj potom, tak ti nejake zariadenie na USB taha moc prudu a doska sa vypne aby sa to neznicilo. zisti co to je.

[UjoJedko]

mne toto minule spôsobovala myš... stačilo vymeniť

[kLemOo]

CMOS som resetol pomocou jumperu ale nepomohlo to

[Kyselinka]

Tak skus vytiahnut vsetky USB co mas zapojene, ako ti radil shiro.

[kLemOo]

Skúšal som všetko, stále to robí to isté, pridalo tam jedno správu CMOS Date/Time is wrong,,niečo v tom zmysle.

[benq]

odisla ti baterka, kup za par korun druhu

[_Mato_]

Skus pri starte pc vstupit do biosu a zvolit nahratie defaultnych nastaveni od vyrobcu. Nasledne nastav spravny cas/datum a nastavenia potvrd ich ulozenim. Ak bude vsetko v poriadku (teda ziadny hardware-problem), malo by to pomoct.

[SurrendeR]

chvilku guglenia....

Problem Solved
I just registered to say that I went trougth a lot of Websites to find my answer for this same problem and I'm here to tell what was actually my problem.

I used the Asus EZ Flash from BIOS to update it to the latest BIOS (still beta - 1201) and the problem was not solved. Left it this way.

I tried removing the motherboard from the case, and yet no solution.

My problem was that a USBPWR jumper was MISSING. YES, that's correct. There were only three of the four jumpers needed for USBPWR on the motherboard. The problem was solved as soon as I correctly jumpered it.

v preklade: nebol ziaden jumper zastrknuty v USBPWR (pozri manual k doske)
Treba dobre najumperovat USBPWR a malo by to ist